American Aldes HRV 1500 SFD, 1500 SFDE Servicing Filters, Servicing Cores, Servicing Blowers

Page 7

Servicing

The HRV 1500 SFD and HRV 1500 SFDE are designed to be serviceable from either side. If access to the unit will only be available from one side, the unit must be set up accord- ingly. The unit is factory shipped to be serviced from the front. (Blowers on the right when facing the unit. If servic- ing is only accessible from the other side follow the proce- dure below.

1.The Ebox must be removed from the front brackets and mounted on the rear brackets provided on the other side of the unit.

2.The filter divider panels must be removed and placed in the unit so they can be removed from the opposite side.

3.The lower blower divider panel must be removed and mounted in the unit from the other side.

Each panel on the unit can be removed by removing the two bolts on the bottom.

Servicing is easiest by removing the side panels on both sides to gain access to either side of the unit.

Servicing Filters

1.Remove filter service panel (one or both sides).

2.Remove first set of filters.

3.Remove filter divider panels (if only accessing from one side).

4.Remove filters from behind filter divider panel.

5.Replace all filters. Ensure that filter divider panels are reinserted into unit.

Servicing Cores

1.Remove core service panel (one or both sides).

2.Slide cores out (regular core maintenance).

3.When placing the cores back into the unit, ensure that there are no gaps between any of the cores.

Ensure all H channels are flush with the ends of the cores before the core service panel is re-attached.

Servicing Blowers

1.Remove blower service panel (one or both sides)

2.Unscrew the 2 bolts that connect the blower to the blower rails of the unit.

3.Remove all wiring to the motors.

4.Slide blower back and lift to remove blower assembly.

5.If access to the unit is not available from both sides, remove the blower divider panel by removing the 8 bolts holding this panel in place.

6.Repeat steps 2-4 with the other blower.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents For Models Introduction Table of Contents Engineering Data SpecificationsDimensions 1500SFDE inches Example Function & ControlsAdditional Features HRV 1500 SFD or Sfde Speed Selection Servicing Blowers ServicingServicing Filters Servicing CoresMounting Frame Application and Location Securing the FrameRoof Curb Detail for Model HRV 1500 Sfde Outside Weatherhoods Ducting General DrainsDuctwork System Consult local CodesDucting Distribution Stale Air Return SystemElectrical Connections Integrated Hvac SystemBalancing Pilot Tube Air Flow Balancing Commercial Balancing ProcedureWiring Diagram TWO Year Limited Warranty 15 Year Core Warranty Heat Recovery Ventilators

HRV 1500 SFD, 1500 SFDE specifications

The American Aldes HRV 1500 SFD and 1500 SFDE are advanced heat recovery ventilators designed to enhance indoor air quality while optimizing energy efficiency in residential and commercial spaces. These models utilize cutting-edge technology to ensure a constant supply of fresh air while simultaneously removing stale air, providing a balanced and healthy indoor environment.

One of the standout features of the HRV 1500 series is its high-performance heat exchanger. This component efficiently transfers heat from the outgoing stale air to the incoming fresh air, significantly reducing the energy loss typically associated with ventilation systems. As a result, buildings can maintain comfortable temperatures with reduced heating and cooling costs. The HRV 1500 SFD model is particularly effective for spaces up to 1500 square feet, while the HRV 1500 SFDE variant serves similar square footage with additional functionality.

Both models are equipped with a dual-fan design that ensures optimal airflow and distribution throughout the building. The fans operate quietly, providing a peaceful indoor atmosphere, and are designed for easy maintenance. The HRV 1500 series includes advanced filters that capture airborne particles, enhancing overall air quality. This feature is especially beneficial for allergy sufferers or those sensitive to pollutants.

Another notable characteristic of the HRV 1500 series is its user-friendly control system. The models seamlessly integrate with smart home technologies, allowing users to monitor and adjust ventilation settings remotely. Additionally, they come with intuitive controls that provide real-time feedback on airflow and system performance.

Energy efficiency is a cornerstone of the HRV 1500 series, which is certified by various energy standards, ensuring compliance with modern building codes. The robust design and durable materials used in these units provide long-term reliability, making them a wise investment for homeowners and building managers alike.

In summary, the American Aldes HRV 1500 SFD and 1500 SFDE heat recovery ventilators offer advanced technology, efficient performance, and a commitment to enhancing indoor air quality. With their high-efficiency heat exchangers, dual-fan systems, advanced filtration, and smart control capabilities, these models stand out in the market for effective residential and commercial ventilation solutions.
Top Page Image Contents