AEG DI 8610 manual Electrical connection, Safety warnings for the electrician

Page 17

Electrical connection

Safety warnings for the electrician

Before connecting the appliance to the power supply, check that the voltage indicated on the rating plate corresponds to the mains power supply available. Appliances fitted with a plug can be connected to any standard power socket within easy access.

Should it be necessary to provide a fixed connection, the hood must only be installed by an electrician authorised by the local electricity board. When installing, an omnipolar disconnector with a distance of at least 3 mm between contacts must be provided.

The manufacture declines all responsibility for malfunctions resulting from failure to comply with the above instructions.

If the power socket is applied directly above the hood this gives two advantages:

Electrical connection

220-240 V – by means of fixed power cable with plug.

(Fixed connection of the appliance must only be carried out by an au- thorised electrician.)

88

Image 17
Contents Page Printed on recycled paper AEG putting words into action Contents For user Safety warningsFor kitchen unit installer Page Extractor version IntroductionFilter version C D E F G H Hood OperationControl device for grease and activated charcoal filters Resetting the saturation indicatorGrease filter LED D Activated charcoal filter LED EMetal grease filter Maintenance and careOpen the metal grease filter Hand washingMounting Cleaning/replacing the carbon filterCarbon filter Changing the light bulb Technical assistance service CleaningSpecial accessories European Guarantee Guarantee conditionsPage Dimensions Mounting accessories includedMaximum absorbed power Technic DetailsElectrical connection Safety warnings for the electricianInstallation Fig 273 244 190 14,5 214 Page 13F 13A