Installation Instructions, General | Vermont Casting ACSG, ACSM

The Vermont Castings Majestic Products Company

INSTALLATION INSTRUCTIONS

GENERAL

1.Read all instructions before using this appliance.

2.This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance. Keep combustible materials,such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (1 m.) from the front of this appliance.

3.CAUTION: Extreme caution is necessary when any heater is used by or near children or invalids and whenever the heater is left operating unattended.

4.If possible, always unplug this appliance when not in use.

5.Do not operate any heater with a damaged cord or plug or after the appliance malfunctions, has been dropped or damaged in any manner.

6.Any repairs to this fireplace should be carried out by a qualified service person.

7.Under no circumstances should this fireplace be modified. Parts having to be removed for servicing must be replaced prior to operating this fireplace again.

8.Do not use outdoors.

9.This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate this appliance where it may fall into a bathtub or other water container.

10.Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from traffic areas and where it will not be tripped over.

11.To disconnect this appliance, turn controls to the off position, then remove plug from outlet.

12.Connect to properly grounded outlets only.

13.This appliance, when installed must be electrically grounded in accordance with local codes, with the current CSA C22.1 Canadian Electrical codes or for USA installations, follow local codes and the National Electrical Code, ANSI/NFPA NO. 70.

14.Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock, fire, or damage the appliance.

15.To prevent possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.

16.This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or flammble liquids are used or stored. This fireplace should not be used as a drying rack for clothing, nor should Christmas stockings or decorations be hung on or near it.

17.Use this appliance only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.

18.Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord shall be No. 16 AWG minimum size and rated not less than 1900 Watts. The extension cord must be a three wire cord with grounding type plug and cord connector.

19.SAVE THESE INSTRUCTIONS.

LOCATING YOUR FIREPLACE

Your new freestanding electric fireplace may be installed virtually anywhere in your home. However, when choosing a location for your new fireplace, ensure that the general instructions are followed. Also, for best effect, install the fireplace out of direct sunlight.

ACSG, ACSM specifications

Vermont Castings has long been synonymous with craftsmanship and quality in the realm of wood and gas stoves. Among its product lineup, the ACSG (All-Season Gas Stove) and ACSM (All-Season Gas Multi-Fuel Stove) stand out for their innovative design and advanced technology.

The ACSG is designed specifically for efficiency and adaptability, allowing homeowners to enjoy a comfortable and warm environment, regardless of the season. One of the main features of the ACSG is its exclusive cast iron construction, which not only provides a classic aesthetic but also ensures optimal heat retention. The stove is equipped with a specially designed burner that produces a clean, consistent flame, enhancing both performance and efficiency. Its large viewing window allows for an unobstructed view of the flames, creating a cozy atmosphere in any room.

On the other hand, the ACSM expands the versatility by enabling the use of different fuel sources, including natural gas or propane. This multi-fuel capability means homeowners have flexibility in how they heat their spaces, making it ideal for varied energy availability and preferences. The ACSM features dual burners to enhance heating efficiency further, allowing for better temperature control and faster warming of the living area.

Both models are equipped with Vermont Castings' advanced technology, including an innovative air wash system that keeps the glass doors clean, ensuring a clear view of the fire without the hassle of frequent cleaning. The stoves also include an adjustable heat output, allowing users to customize their heat levels according to individual needs and preferences.

In terms of design, the ACSG and ACSM embody the rustic charm that Vermont Castings is known for, available in multiple finishes and styles to complement any home décor. They also incorporate environmentally friendly features, ensuring they meet the most stringent emissions standards.

Overall, the Vermont Castings ACSG and ACSM represent a commitment to quality and performance, combining traditional craftsmanship with cutting-edge technology, making them an excellent choice for homeowners looking to enhance their heating solutions. Whether for cozy winter nights or cool summer evenings, these stoves are designed to deliver warmth and comfort throughout the year.