Service Instructions, Firebox Removal | Vermont Casting ACSM, ACSG

The Vermont Castings Majestic Products Company

SERVICE INSTRUCTIONS

WARNING: Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electrical shock or personal injury

FIREBOX REMOVAL

1.Unplug the electrical supply to the unit.

2.Let the fireplace cool if it has been operating.

3.Move the fireplace away from wall to gain access to the rear of the unit.

4.Locate the firebox mounting brackets on the side of the firebox. Remove the screws securing the firebox to the mounting brackets. (Figure 1).

5.Remove firebox by sliding it rearward out of the casing.

6.Gently place firebox on its back on the floor.

7.To reinstall firebox, follow the above procedure in reverse.

Mounting Brackets (2 per side)

Figure 1: Side view of the firepla showing the firebox mounting br

GLASS INFORMATION

1.Under no circumstances should this product be operated with missing or broken glass.

2.Do not strike or slam the glass.

3.Do not use abrasive cleaners to clean the glass.

4.This product uses tempered glass. Replacement glass (with gasket) is available from the manufacturer and replacement should be carried out by a qualified service person.

REPLACING LIGHT BULBS

This fireplace uses two clear 120 Volt, 60 Watt, E-12 socket base light bulbs (small base, chandelier candle type). The 60 Watt bulbs are located under the log set/ ember bed. For convenience, if one of the bulbs burns out, it may be a good idea to replace both of the light bulbs.

1.Turn off power to the unit by unplugging the power cord.

2.Let fireplace cool if it has if it has been operating.

3.Remove firebox from casing. (See Firebox removal)

4.Remove the two screws securing the ember bed and log set in position. One screw is located on either side of the ember bed near the front.

5.Examine the bulbs to determine which bulbs need to be replaced.

6.While holding the socket, unscrew defective bulb(s).

7.Install the new light bulb(s) by screwing in while holding the socket.

8.Reinstall ember bed and log set.

9.Reinstall firebox.

WARNING: Do not exceed 60 watts per bulb for lights beneath the ember bed. Use of higher rated bulbs may result in a fire, causing property damage or personal injury.

MAINTENANCE OF MOTORS

The motors used on the fan and the flame generator assembly are prelubricated for extended bearing life and require no further lubrication. However, periodic cleaning/ vacuuming of the fan/heater unit is recommended.

WARNING: Make sure that the power is turned off before proceeding.

ACSG, ACSM specifications

Vermont Castings has long been synonymous with craftsmanship and quality in the realm of wood and gas stoves. Among its product lineup, the ACSG (All-Season Gas Stove) and ACSM (All-Season Gas Multi-Fuel Stove) stand out for their innovative design and advanced technology.

The ACSG is designed specifically for efficiency and adaptability, allowing homeowners to enjoy a comfortable and warm environment, regardless of the season. One of the main features of the ACSG is its exclusive cast iron construction, which not only provides a classic aesthetic but also ensures optimal heat retention. The stove is equipped with a specially designed burner that produces a clean, consistent flame, enhancing both performance and efficiency. Its large viewing window allows for an unobstructed view of the flames, creating a cozy atmosphere in any room.

On the other hand, the ACSM expands the versatility by enabling the use of different fuel sources, including natural gas or propane. This multi-fuel capability means homeowners have flexibility in how they heat their spaces, making it ideal for varied energy availability and preferences. The ACSM features dual burners to enhance heating efficiency further, allowing for better temperature control and faster warming of the living area.

Both models are equipped with Vermont Castings' advanced technology, including an innovative air wash system that keeps the glass doors clean, ensuring a clear view of the fire without the hassle of frequent cleaning. The stoves also include an adjustable heat output, allowing users to customize their heat levels according to individual needs and preferences.

In terms of design, the ACSG and ACSM embody the rustic charm that Vermont Castings is known for, available in multiple finishes and styles to complement any home décor. They also incorporate environmentally friendly features, ensuring they meet the most stringent emissions standards.

Overall, the Vermont Castings ACSG and ACSM represent a commitment to quality and performance, combining traditional craftsmanship with cutting-edge technology, making them an excellent choice for homeowners looking to enhance their heating solutions. Whether for cozy winter nights or cool summer evenings, these stoves are designed to deliver warmth and comfort throughout the year.