Natural Gas Supply Connection, To Connect

Fig. 6a

Gas Hookup

Natural Gas Supply Connection

To Connect:

1.Push back the Sleeve on the Socket as shown below (see Fig. 6a).

2.Insert Plug and release the Sleeve (see Fig. 6b).

3. Push the Plug until Sleeve snaps forward to lock	Retract Sleeve
the Plug in the Socket.

• WARNING : Always conduct the following safety tests before lighting the Grill, to prevent a possible fire or explosion (see leak test below)

To Disconnect:

1. Push Sleeve back and pull the Plug out.

Testing For Gas Leaks

Before attempting to operate this Grill :

1. Always confirm that all burner control knobs are

Release Sleeve

Fig. 6b

in the OFF position.

2.Always connect the gas supply hose first and then open the gas shutoff valve.

3.Always use a brush or spray bottle to apply a 50/50 solution of liquid soap and water to all connection points (see Fig. 5) to test for gas leaks. Never use a match or open flame for that purpose.

4.Always look for bubbles to appear, as the appearance of bubbles will indicate a gas leak. Always turn off the gas immediately and tighten the connection, if you find that a leak exists.

5.Always repeat this procedure until no further gas leaks are found to exist, before lighting the Grill.

6.Never attempt to light this Grill, however, if a leak cannot be stopped. Always call your propane gas supplier promptly to obtain assistance.

WARNINGS :

•Always consult the Rating Label on the back of the Grill to confirm that it has already been configured to burn Natural Gas. If it is necessary to reconfigure the Grill, however, always utilize the Natural Gas Fuel Conversion Kit available from your Vermont Castings retailer, to prevent possible bodily injury.

•All gas suppy plumbing should be performed only by a qualified service agency. In the U.S., the supply connection must be made in accordance with local code or, in the absence of local codes, with the national fuel gas codes, ANSI Z223.1. In Canada, the supply connection shell be carried out in accordance with the provincial authorities having jurisdiction and in accordance with the requirements of the CAN/CGA 1-B149.1 AND .2 installation code. A shut-off value must be installed between the gas grill and the main supply. For natural gas, use a 3/8” or 1/2” natural gas supply line capable of an a input of at least 60,000 BTU’S.

•Always disconnect the Grill and close its individual manual shutoff valve, when conducting pressure tests of the gas supply piping system at pressures which exceed 1/2 psi (3.5kPa).

•Always isolate the Grill from the gas supply piping system by closing its individual manual shutoff valve when conducting pressure tests of the gas supply piping system at pressures which are equal to or less than 1/2 psi (3.5kPa).

Page 5

VC400, VC200 specifications

Vermont Casting is renowned for producing high-quality, durable wood and gas stoves, and the VC200 and VC400 are two of their most popular models. Both stoves combine traditional craftsmanship with modern technology, ensuring efficient heating and impeccable performance.

The VC200 model is designed for those looking for a compact yet efficient heating solution. One of its standout features is its efficient burning system, which maximizes heat output while minimizing emissions. The VC200 utilizes a robust cast iron construction, which not only contributes to its durability but also helps retain heat for longer periods. Its air wash system keeps the glass door clean, providing an unobstructed view of the flames, enhancing the ambiance of any room.

In terms of technology, the VC200 incorporates an environmentally friendly design, allowing for wood burning that meets stringent emission standards. The stove's compact design makes it suitable for smaller spaces, and its easy-to-use operation ensures that anyone can manage it effectively. The VC200 is a perfect choice for those who want a reliable heating option without the bulkiness of larger models.

On the other hand, the VC400 offers a more robust heating solution for larger areas. This stove boasts a higher heat output capacity, making it ideal for larger homes or open spaces. Like the VC200, it features a cast iron construction, but with an expanded firebox that allows for longer wood pieces, contributing to extended burn times.

The VC400 is equipped with Vermont Casting's advanced air combustion system, which improves efficiency and reduces smoke emissions, aligning with modern environmental standards. Its sophisticated design ensures that the stove operates quietly while delivering consistent warmth throughout the space. With a larger viewing area, users can enjoy the flickering flames from multiple angles, adding charm and comfort to their living areas.

Both the VC200 and VC400 are available in various finishes, allowing homeowners to select a style that complements their décor. Additionally, the stoves come with a variety of optional accessories, such as outside air kits and heat shields, making them versatile to individual heating needs.

In summary, the Vermont Casting VC200 and VC400 models exemplify the blend of traditional craftsmanship and modern technology. With their durable cast iron construction, efficiency, and aesthetic options, these stoves cater to different heating needs while providing a reliable and charming heating solution for any home.