Installation Instructions, General | Vermont Casting ACSB ACSM

Addison Electric Stove

Installation Instructions

General

1.Read all instructions before using this appliance.

2.This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. If provided, use handles when moving this appliance. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3’ (1m) from the front of this appliance.

3.CAUTION: Extreme caution is necessary when any heater is used by or near children or inva- lids and whenever the heater is left operating unattended.

4.If possible, always unplug this appliance when not in use.

5.Do not operate any heater with a damaged cord or plug or after the appliance malfunctions, has been dropped or damaged in any manner.

6.Any repairs to this stove should be carried out by a qualiﬁed service person.

7.Under no circumstances should this stove be modi- ﬁed. Parts having to be removed for servicing must be replaced prior to operating this stove again.

8.Do not use outdoors.

9.This heater is not intended for use in bathrooms, laundry areas and similar indoor locations. Never locate this appliance where it may fall into a bathtub or other water container.

10.Do not run cord under carpeting. Do not cover cord with throw rugs, runners or the like. Arrange cord away from trafﬁc areas and where it will not be tripped over.

11.To disconnect this appliance, turn controls to the off position, then remove plug from outlet.

12.Connect to properly grounded outlets only.

13.This appliance, when installed must be electrically grounded in accordance with local codes, with the current CSA C22.1 Canadian Electrical codes or for USA installations, follow local codes and the National Electrical Code, ANSI/NFPA NO. 70.

14.Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause

an electric shock, ﬁre, or damage the appliance.

15.To prevent possible ﬁre, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.

16.This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or ﬂammable liquids are used or stored. This stove should not be used as a drying rack for clothing, nor should Christmas stockings or decorations be hung on or near it.

17.Use this appliance only as described in this manual. Any other use not recommended by the manufacturer may cause ﬁre, electric shock, or injury to persons.

18.Avoid the use of an extension cord because the extension cord may overheat and cause a risk of ﬁre. However, if you have to use an extension cord, the cord shall be No. 14 AWG minimum size and rated not less than 1875 Watts. The extension cord must be a three wire cord with grounding type plug and cord connector. The extension cord shall not be more than 20 feet in length.

19.SAVE THESE INSTRUCTIONS.

Locating Your Stove

Your new freestanding electric stove may be installed virtually anywhere in your home. However, when choosing a location for your new stove, ensure that the general instructions are followed. Also, for best effect, install the stove out of direct sunlight.

30002351

ACSB ACSM specifications

Vermont Casting is renowned for its commitment to quality and innovation in the realm of wood and gas-burning stoves, with their ACSB (Advanced Clean Systems B) and ACSM (Advanced Clean Systems M) models showcasing cutting-edge technology and elegant design. These stoves not only enhance the aesthetic appeal of a home but also provide exceptional performance and efficiency.

One of the standout features of both the ACSB and ACSM is their Advanced Clean Combustion technology. This innovative system ensures a cleaner burn with reduced emissions, making both models environmentally friendly options for those who prioritize sustainability. The ACSB model is specifically designed for burning wood, focusing on maximizing heat output while minimizing smoke and particulate matter released into the air. This is paramount for users conscious of their environmental footprint.

The ACSM model, on the other hand, caters to those who prefer gas-burning stoves. Featuring an electronic ignition system, this model allows for quick and convenient lighting, ensuring that users can enjoy the warmth and comfort of their stove at the push of a button. Moreover, it has adjustable flame settings, allowing for personalized heat output according to the user's needs and preferences.

Both models are constructed from high-quality cast iron, ensuring durability and longevity. Their robust build enables them to retain heat for extended periods, providing a sustained warmth that is ideal for cold Vermont winters. Aesthetic options, including various finishes and door designs, allow homeowners to seamlessly integrate these stoves into their existing décor.

Ease of use is another crucial aspect of the ACSB and ACSM stoves. Both models feature large viewing windows, enhancing the ambiance of any living space while providing an unobstructed view of the fire. The ash pan is designed for easy removal, making cleanup a hassle-free process.

In summary, the Vermont Casting ACSB and ACSM models are epitomes of efficiency, sustainability, and style. With advanced combustion technologies, durable cast iron construction, and user-friendly features, these stoves stand out in the market for anyone looking to add warmth and charm to their home. They exemplify the perfect blend of tradition and innovation, making them a worthy investment for any homeowner.