Sunfire SRS-210R manual Specifications, Dimensions

Page 20

Specifications

Amplifier Output

2,700 watts rms

High Cut Filter

30 Hz - 100 Hz adjustable, with a "Bypass" position

Frequency Response

18 Hz - 115 Hz (-3 dB)

Power Line Voltage

US model

120 VAC 50/60 Hz

International model 230 VAC 50/60 Hz

Dimensions

Amplifier (H x W x D) 1.75" (1U) x 17" x 15"

44.5 mm x 431.8 mm x 381 mm

Subwoofer

14.25" x 44.5" x 3.5"

362 mm x 1130 mm x 88.9 mm

Weight

Amp: 18.4 lb. (8.35 kg)

Sub: 59 lb. (26.8 kg)

Subwoofer Finish

High gloss, ebonized rosewood

Line Power Consumption:

800 watts average, at maximum continu- ous output. 8 watts at idle

2,700 watts peak, time limited basis

Output Levels:

Greater than 110 dB peak SPL (includes room gain) from 18 Hz to 100 Hz. Mea- surement is one meter, anechoic.

A typical Sunfire subwoofer can be expected to ‘best’ its specified minimum peak SPL by several decibels.

Total Harmonic Distortion

Typically less than 1/10 of the funda- mental between 18 to 80 Hz.

Input Sensitivity (full output):

250 mVrms from left input with volume control at 0 dB, 60 mVrms volume con- trol fully clockwise*

0.75Vrms from right input with volume control at 0 dB, 200 mVrms volume control fully clockwise*

Input Impedance:

30 kΩ for Line-Level inputs

56 kΩ for Hi-Level inputs

40 kΩ for XLR input, each leg balanced to ground

XLR Input

Pin 1

Ground

Pin 2

Positive

Pin 3

Negative

Drivers: dual 10 inch

Extra large neodymium magnets and long throw mechanical design yield very high back-emf. The result is extraordi- narily high operating efficiency – that is, more acoustic output for each watt of input.

Internal System Gain:

50 dB from left input jack to speaker with volume control at 0 dB, 62 dB with control fully clockwise*

40 dB from right input jack to speaker with volume control at 0 dB, 52 dB with control fully clockwise*

*The Sunfire subwoofer utilizes dif- ferential gain on the left and right inputs to retain both L+R and L-R information.

12 VDC Trigger Input

Input voltage range: 5 -18 VDC

Impedance: approx 600 Ω (20 mA @ 12 V)

Removable terminal block, and one 1/8” Mono minijack, tip positive.

© 2007 Sunfire Corporation.

All rights reserved. Sunfire Corporation reserves the right to improve its products at any time. Therefore, specifications are subject to change without notice.

Manual 913-125-00 Rev C

20 User's Manual

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Page Important Safety Instructions Contents Features IntroductionUnpacking CareAmplifier OverviewDrivers Amplifier Features Volume Rack EarsLine-Level Inputs OutputsControl Panel Features Balanced XLR InputTrigger Inputs Speaker Level OutputsHeat rise Amplifier InstallationAC Power Considerations Connections Speaker Level connectionsSubwoofer installation Mounting optionsFinding a good location Magnetic FieldsRoom Equalization Procedure Automatic EQ ModeManual EQ Mode Resetting the EQSystem Configurations Connections to a preamplifier’s subwoofer outputConnections to a preamplifier using Y cables Using the line level high-pass outputs Adjusting the controls Subwoofer Installation Instructions Mounting pointsHorizontal position Flat on its backVertical position Specifications DimensionsNot enough bass in a 5.1 system TroubleshootingNot enough bass Subwoofer won’t turn on automatically HumSubwoofer won’t turn off Limited Warranty Service Assistance

SRS-210R specifications

The Sunfire SRS-210R is a compact, high-performance subwoofer designed to deliver an exceptional audio experience in both home theater and music applications. Renowned for its innovative technology and impressive sound quality, the SRS-210R is a great choice for audiophiles and casual listeners alike.

One of the standout features of the SRS-210R is its unique design. The subwoofer utilizes a patented "Rift" technology, which allows for a smaller footprint without sacrificing sound quality. This makes it ideal for those who have limited space but still want powerful bass performance. Its sleek and modern aesthetic also means it can fit seamlessly into any décor.

At the heart of the SRS-210R is a 10-inch high-excursion driver that is paired with a powerful amplifier capable of delivering up to 300 watts of peak power. This combination ensures that the subwoofer can produce deep, impactful bass that can fill a room without distortion, even at high volume levels. The bass response is further enhanced by the use of a vented enclosure, which allows for better airflow and improved efficiency.

In terms of connectivity, the Sunfire SRS-210R offers a variety of options to accommodate different setups. It includes both line-level RCA inputs and speaker-level inputs, making it versatile for connecting to different audio sources. Additionally, the subwoofer features variable phase control and a low-pass filter, enabling users to fine-tune the integration with their main speakers for a more cohesive sound stage.

Another notable characteristic of the SRS-210R is its high-quality construction. Sunfire has designed this subwoofer with durability in mind, ensuring that it can withstand the rigors of everyday use while still providing consistent performance. The cabinet is made from premium materials that reduce resonance, allowing for clearer sound reproduction.

Overall, the Sunfire SRS-210R is a remarkable subwoofer that balances compact size with potent audio capabilities. Its innovative technologies and features, combined with its stylish design, make it an excellent addition to any home audio system. Whether for movies, music, or gaming, the SRS-210R promises to elevate your listening experience to new heights with deep, thunderous bass.
Top Page Image Contents