Sunfire SRS-210R manual Overview, Drivers, Amplifier

Page 5

Overview

Your Sunfire SubRosa subwoofer is designed to give you the best possible low-frequency sound quality for your Home Theater experience. It incorporates a tremendously powerful amplifier and a pair of drivers to produce tight, floor-rum- bling, denture-rattling bass that you can feel as well as hear.

The subwoofer has an automatic equalization system that will tailor the subwoofer output to compensate for any room effects. It also has a manual equal- ization mode.

The subwoofer has an adjustable high cut filter and line-level inputs for easy incorporation into existing systems, or as part of a subwoofer/satellite speaker combination.

Controls for adjusting the volume, crossover frequency and phase, allow the subwoofer to be perfectly matched to any listening environment and audio components.

The Drivers

To have lots of bass requires moving lots of air. Your Sunfire subwoofer incor- porates two drivers that can move back and forth approximately five times more than a normal subwoofer. This gives it a lot of air moving capacity which allows for majestic bass performance.

The woofers are high-strength designs, using neodymium magnets.

The Amplifier

The large movement range of the driv- ers creates greater air pressure inside the box than a conventional subwoofer. Therefore, the drive amplifier must be much more powerful than an ordinary subwoofer amplifier. In fact, it has to be so powerful, it is almost hard to believe.

The power amplifier within your Sunfire subwoofer is capable of delivering over 2,700 watts. When the same full output is applied to the drivers, however, the enor- mous back-electromotive force generated as a consequence of its large motion and giant magnets, causes the current flow to be much less. It is this singular property of the drivers that allows the subwoofer to be approximately ten times more ef- ficient than a subwoofer this size would normally be.

A compressor circuit kicks in automati- cally if the input signal level reaches a level that would overload the drivers. This maintains a ceiling on the output without clipping. If the input signal is driven even further, a ‘soft clipping’ circuit is enabled. This allows the subwoofer to put more sound into the room to satiate the power hungry user, but without distortion or damage to the subwoofer. Thus, for ex- plosive scenes in movies, this produces extremely high sound pressure levels (SPL) in your room without the drivers banging against the mechanical stops.

For more details of the subwoofer design, please call us or visit our website: www.sunfire.com.

User's Manual

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Page Important Safety Instructions Contents Introduction FeaturesUnpacking CareAmplifier OverviewDrivers Amplifier Features Rack Ears VolumeLine-Level Inputs OutputsBalanced XLR Input Control Panel FeaturesTrigger Inputs Speaker Level OutputsHeat rise Amplifier InstallationAC Power Considerations Speaker Level connections ConnectionsMounting options Subwoofer installationFinding a good location Magnetic FieldsAutomatic EQ Mode Room Equalization ProcedureResetting the EQ Manual EQ ModeConnections to a preamplifier’s subwoofer output System ConfigurationsConnections to a preamplifier using Y cables Using the line level high-pass outputs Adjusting the controls Mounting points Subwoofer Installation InstructionsHorizontal position Flat on its backVertical position Dimensions SpecificationsNot enough bass in a 5.1 system TroubleshootingNot enough bass Subwoofer won’t turn on automatically HumSubwoofer won’t turn off Service Assistance Limited Warranty

SRS-210R specifications

The Sunfire SRS-210R is a compact, high-performance subwoofer designed to deliver an exceptional audio experience in both home theater and music applications. Renowned for its innovative technology and impressive sound quality, the SRS-210R is a great choice for audiophiles and casual listeners alike.

One of the standout features of the SRS-210R is its unique design. The subwoofer utilizes a patented "Rift" technology, which allows for a smaller footprint without sacrificing sound quality. This makes it ideal for those who have limited space but still want powerful bass performance. Its sleek and modern aesthetic also means it can fit seamlessly into any décor.

At the heart of the SRS-210R is a 10-inch high-excursion driver that is paired with a powerful amplifier capable of delivering up to 300 watts of peak power. This combination ensures that the subwoofer can produce deep, impactful bass that can fill a room without distortion, even at high volume levels. The bass response is further enhanced by the use of a vented enclosure, which allows for better airflow and improved efficiency.

In terms of connectivity, the Sunfire SRS-210R offers a variety of options to accommodate different setups. It includes both line-level RCA inputs and speaker-level inputs, making it versatile for connecting to different audio sources. Additionally, the subwoofer features variable phase control and a low-pass filter, enabling users to fine-tune the integration with their main speakers for a more cohesive sound stage.

Another notable characteristic of the SRS-210R is its high-quality construction. Sunfire has designed this subwoofer with durability in mind, ensuring that it can withstand the rigors of everyday use while still providing consistent performance. The cabinet is made from premium materials that reduce resonance, allowing for clearer sound reproduction.

Overall, the Sunfire SRS-210R is a remarkable subwoofer that balances compact size with potent audio capabilities. Its innovative technologies and features, combined with its stylish design, make it an excellent addition to any home audio system. Whether for movies, music, or gaming, the SRS-210R promises to elevate your listening experience to new heights with deep, thunderous bass.
Top Page Image Contents