Therma-Stor Products Group Quiet-Vent Ventilation System owner manual Fresh Air Inlets

Page 3

be positioned in the home to minimize the amount of duct and wire required for installation. The unit should be mounted and oriented to allow periodic blower oiling, cleaning of the internal blower screen via the side mounted clean-out port, and adjustment of the 7-day timer (the timer can be remote mounted away from the Quiet- Vent (see paragraph F). In cold climates the unit should be located in a heated space to prevent condensation from forming inside the cabinet. A basement or utility room is an ideal location.

If the Quiet-Vent and its ducting must be located in a unheated space in a cold climate, they must be insulated to prevent condensation from forming in the system.

If the Quiet-Vent is used to correct a moisture problem in an existing house, a 6” duct should be run from near the ceiling in the center of the house to the Quiet-Vent (see Fig. 3). This will provide adequate ventilation.

2.3 Fresh Air Inlets

The “FRESH 80” fresh air inlets are recommended to provide fresh air to the bedrooms and prevent excessive depressurization. These fresh air inlets should be located on an exterior wall near the ceiling in any isolated rooms that are occupied for extended periods of time with the door closed. These vents have an adjustable opening, a filter and a shut off valve. One air inlet is recommended in each bedroom.

 

 

14.5”

 

 

11” Hanger Strap

 

 

(4 supplied)

 

 

Oil Port

 

6”

Electrical

13.125”

Inlet

 

Box Cover

 

 

13.5”

 

 

7-Day Timer

Figure 1

 

11” Hanger Strap

 

(4 supplied)

6”

4”

Inlet

Inlet

4”

4”

Inlet

Inlet

Figure 2

Figure 3

Toll-Free 1-800-533-7533

www.thermastor.com • sales@thermastor.com

Image 3
Contents Read and Save These Instructions Location of the Quiet-Vent SpecificationsInstallation Back-Drafting Open Combustion DevicesFresh Air Inlets Wiring the Quiet-Vent Hanging the Quiet-VentDucting to and from the Quiet-Vent Operation MaintenanceService Parts ServiceQUIET-VENT Ventilating System Limited Warranty

Quiet-Vent Ventilation System specifications

The Therma-Stor Products Group Quiet-Vent Ventilation System represents a significant advancement in indoor air quality technology, specifically designed for residential and commercial applications. This innovative system addresses the growing demand for effective ventilation solutions that minimize noise while maximizing performance. With a focus on customer comfort, sustainability, and efficiency, the Quiet-Vent is a standout choice for those seeking to improve their indoor environments.

One of the main features of the Quiet-Vent Ventilation System is its whisper-quiet operation. This is achieved through advanced engineering and sound-dampening technologies that significantly reduce the noise associated with typical ventilation systems. Users can enjoy fresh, filtered air without the disruptive sounds that often accompany traditional systems, making it ideal for bedrooms, offices, and shared living spaces.

The system incorporates state-of-the-art filtration technologies that effectively capture airborne pollutants, allergens, and particulates. With high-efficiency particulate air (HEPA) filters, the Quiet-Vent ensures that the air being circulated is clean and healthy. This is particularly beneficial for households with allergy sufferers or those concerned about indoor air quality due to external pollutants.

Another noteworthy characteristic of the Quiet-Vent system is its energy efficiency. The design includes an energy recovery ventilator (ERV), which transfers heat and moisture between incoming and outgoing air streams. This process helps maintain balanced humidity levels while reducing energy consumption, translating into lower utility bills and a reduced environmental footprint.

The Quiet-Vent is also designed with user-friendly controls, making it easy to monitor and adjust settings to suit individual preferences. Optional smart technology integration allows for remote operation and scheduling, providing convenience for modern users who rely on automation and smart home devices.

Durability and reliability are critical components of the Quiet-Vent’s design. Built with high-quality materials, the system is engineered to withstand the test of time, requiring minimal maintenance. This feature ensures peace of mind for homeowners and business operators alike.

In conclusion, the Therma-Stor Products Group Quiet-Vent Ventilation System is a sophisticated solution for anyone looking to enhance their indoor air quality. With its quiet operation, advanced filtration technologies, energy efficiency features, user-friendly controls, and durable construction, it stands out as a top choice for effective ventilation without compromise. This system represents a significant leap forward in creating healthier, more comfortable indoor environments.