Ducting, Wiring, Power Unit Installation

DUCTING

1.Refer to Figure 6. Connect the ductwork to damper/duct connector. Tape all joints with duct tape.

WIRING

NOTE: All wiring connections must comply with local codes, ordinances and the National Electric Code and the ventilator must be properly grounded.

1.Loosen screws and remove junction box.

2.Run 120vAC supply wiring with ground through switch box to knockout in ventilator housing and secure with box connector.

3.Refer to Figure 7. Connect supply wires to ventilator wires: black to black, white to white. Connect ground wire to green ground screw.

4.Replace junction box and tighten screws.

5.Connect supply wire to switch.

NOTE: Switch must be purchased separately. Refer to NuTone's catalog for complete ordering information.

POWER UNIT INSTALLATION

1.Reinstall the power unit and tighten the hex nuts securely to assure minimum sound levels.

2.Plug in blower.

GRILLE INSTALLATION

Install the grille using the screws provided.

MAINTENANCE

•Disconnect the power before cleaning or performing any maintenance on the ventilator.

•If the grille becomes dirty, use only a mild soap and water solution for cleaning. Do not use solvents or abrasive cleaners.

FIGURE 6

	GREEN
BLACK		GREEN
BLACK		GROUND
		GROUND
		SCREW

WHITE

STANDARD	SWITCH
WALL SWITCH	BOX

EARTH

GROUND

120vAC, 60 Hz

HOUSE POWER

FIGURE 7

COOKING AREA

DO NOT INSTALL ABOVE OR INSIDE

THIS AREA

45°45°

COOKING	FLOOR
EQUIPMENT

FIGURE 8

QT1000, QT700 specifications

The NuTone QT700 and QT1000 are renowned ventilation fans designed for residential and commercial applications, ensuring an efficient and quiet way to enhance indoor air quality. Both models are part of NuTone’s continuous effort to provide high-performance products crafted with state-of-the-art technologies and user-friendly features.

One of the standout features of the NuTone QT700 is its remarkably quiet operation. With a decibel rating of just 0.5 sones, this model is engineered to operate at a minimal noise level, making it ideal for use in bathrooms, kitchens, and other living spaces. The QT1000 takes this a step further, boasting advanced sound insulation technology, which reduces noise even more, allowing for an unobtrusive experience in your home.

In terms of airflow, both models excel. The NuTone QT700 offers an impressive airflow capacity of 110 CFM, while the QT1000 provides a higher output of 120 CFM. This means both units effectively remove excess moisture and airborne pollutants, helping to prevent mold and mildew growth and maintaining a healthy environment.

Energy efficiency is also a crucial characteristic of these models. Both the QT700 and QT1000 are equipped with energy-efficient motors, consuming less power while still delivering powerful performance. The built-in LED lighting feature provides bright, energy-efficient illumination in the spaces where they are installed, enhancing the functionality of the fan.

Installation is simplified with these models, thanks to their adjustable mounting brackets that fit various ceiling types. The QT700 and QT1000 come with easy-to-follow installation instructions, making it a hassle-free task, even for DIY enthusiasts. Additionally, they are designed to integrate seamlessly with existing ductwork, allowing for a quick and efficient setup process.

Durability and reliability are also key components of the NuTone QT700 and QT1000, as they feature high-quality materials that are built to last. The units are equipped with a robust, corrosion-resistant housing that can withstand humid environments, ensuring long-term performance.

Overall, both the NuTone QT700 and QT1000 ventilation fans stand as testament to NuTone's commitment to quality and innovation, providing effective solutions for improved air quality while combining energy efficiency and quiet operation. Whether for a bathroom, kitchen, or utility area, these fans offer both style and functionality, making them an excellent investment for any home.