NuTone manual NP64000 Series Range Hood System Interior Blowers

- NP64000 SERIES RANGE HOOD SYSTEM -

INTERIOR BLOWERS

Model 647	Model 634 or 644	Model 643
(7” Rd wall cap)	(roof cap)	(8” Rd wall cap)

	Model 418
Model 415	10” round
	adjustable elbow
7” round adjustable
	(optional)
elbow (optional)
Model 407	8” round
	standard
(7” round -
	duct
2 ft. sections)
Model 412	Model 413
transition
(31/4” x 10” to 7”)	transition
Standard duct	(31/4” x 10” to 8”)
(31/4” x 10”)

Adapter and damper 31/4” x 10” (supplied with P5 blower)

Flow deviator (vertical exhaust only)

(supplied with P5 and P8 blowers)

Rough-in kit (supplied with P5 and P8 blowers)

Model P5 single-blower (500 cfm)

RMP Series Backsplash (Stainless Steel wall covering with warming shelves. Optional)

Model 459 transition (31/4” x 14” to 8”)

Duct

(31/4” x 14”)

Adapter and damper 31/4’’ x 14’’ (supplied with P8 blower)

NP64000 SERIES HOOD

Model P8 dual-blower (900 cfm) for use with 36’’ hoods or wider

NOTE: The dual blower P8 must be installed with 31/4’’ x 14’’ duct. If it is impossible to connect the dual blower P8 to a 31/4’’ x 14’’ duct, use a 31/4’’ x 10’’ duct. In that case, the blower performance will be 25% decreased.

HL0070

- 3 -