SWR Sound Super Redhead Speaker Cable, Speaker and Horn Fuses, Line Fuse, AC Convenience Outlet

Page 11

Recommended SWR extension speakers for the Super Redhead include the following models:

SWR Goliath III (4x10)

SWR Goliath Junior III (2x10) (8 ohm version)

SWR Son of Bertha (1X15)

SWR Big Ben Subwoofer (1x18)

SWR Workingman’s 4X10T

SWR Workingman’s 2X10T

SWR Workingman’s 1X15T

Note: The Speaker On/Off switch does not affect the Extension Speaker jack.

SPEAKER CABLE

For all speaker connections, we recommend the use of high quality speaker cable that is at least 18 gauge or heavier (the lower the gauge, the heavier the cable).

Note: Do not use shielded instrument cable to connect an external speaker enclosure. Doing so can result in intermittent power loss, cause your amplifier to oscillate and damage itself (and/or your speakers), and render the cable useless for any purpose.

SPEAKER AND HORN FUSES

These fuses are provided for protection of the Super Redhead’s internal speakers and horn/tweeter in the unlikely event of a power amp failure (or vice-versa). The fuses can also blow due to improper connections, shorted speaker cable, or playing while connecting or disconnecting speaker cabinets.

Correct size and rating of the speaker fuse is 3AG, 10 amp, fast-blo.

Correct size and rating of the horn fuse is 3AG, 3 amp, fast-blo.

Note: Do not defeat the purpose of this feature by using a fuse with a higher rating.

LINE FUSE

The Line Fuse will open (blow) if an internal problem exists with the electronics or in the event of a power surge or high power line transients.

Correct US size and rating: 3AG, 7 amp, slo-blo (for 120 volt operation).

Correct European size and rating: 3AG, 4 amp, slo-blo (for 220/240 volt operation).

Note: Do not defeat the purpose of this feature by using a fuse with a higher rating.

AC CONVENIENCE OUTLET

Any electronic device that operates on 120 volts, 60Hz and draws less than 3 amps or 360 watts may be plugged into the convenience outlet. This outlet is especially useful for powering units housed in the internal rack space such as multi-effects or rack tuners.

It should be noted that some appliances such as fluorescent lights can cause interferenceor noise to be induced in the Super Redhead.

SUPER REDHEAD OWNER’S MANUAL • 9

Image 11
Contents Super Redhead Important Safety Instructions SWR IntroductionOutput Impedance Super Redhead SpecificationsInput Impedance PASSIVE/ACTIVE Input Jack Front Panel FeaturesInternal Cabinet Specifications Tuner InputMID Range Section Frequency Control Tips for Using the MID Range ControlsMaster Volume Control Power AMP Clip LEDXLR PAD GROUND/LIFT SwitchLINE/DIRECT Switch MUTE/LIVE SwitchRear Panel Features Extension Speaker Jack FAN ON/OFF SwitchHigh Frequency Attenuator Internal Speaker CableAC Convenience Outlet Speaker CableSpeaker and Horn Fuses Line FuseSpecial Features Swrsound.com Page

Super Redhead specifications

The SWR Sound Super Redhead is a standout choice for musicians seeking a powerful and portable bass amplifier. Known for its exceptional sound quality and rich tonal capabilities, this amplifier combines impressive engineering with high-end performance, making it a favorite among professional bass players.

One of the primary features of the Super Redhead is its 400-watt power output, which provides sufficient headroom for live performances and studio recordings. Its ability to deliver a robust low end and clear mids makes it suitable for various musical styles, from jazz and blues to rock and metal. The amplifier is equipped with a custom-designed speaker cabinet featuring a 1x15-inch driver, designed to maximize low-frequency response while ensuring clarity across the entire frequency spectrum.

Another notable characteristic of the Super Redhead is its built-in 4-band EQ. This equalization system allows musicians to tailor their sound precisely to their liking, offering control over bass, low mid, high mid, and treble frequencies. The presence of a contour knob also enables players to shape their tone effortlessly, producing everything from a punchy slap sound to a smooth, rounded tone.

The Super Redhead incorporates SWR’s patented "tube compression" circuitry, which provides a warmth reminiscent of vintage tube amplifiers. This technology enhances sustain and articulation, resulting in a tonal depth that players appreciate. Additionally, the amplifier features a balanced XLR output for direct recording or PA integration, preserving tonal integrity in any setting.

Portability is another major appeal of the SWR Sound Super Redhead. Weighing in at just under 50 pounds, it remains manageable for gigging musicians. Its rugged construction ensures durability while the stylish design makes it visually appealing on stage.

Overall, the SWR Sound Super Redhead stands out for its innovative technologies, powerful sound generation, and versatility. Musicians looking for a reliable, high-performance bass amplifier will find that the Super Redhead not only meets but often exceeds their expectations. Whether in the studio or on stage, this amplifier has proven itself to be an essential tool for bassists who demand the best in sound quality and performance.