5. Storage
■Before Long-term Storage
•Drain fuel tank and run engine out until all fuel in the carburetor is used up.
•Remove the spark plug and drop a spoonful 2 cycle oil into the cylinder. Crank the engine several times and replace the plug.
Pull starter until compression is felt.
•Brush off dirt from the drill surface and apply rust protective oil.
•Store the machine in a dry,
6. Specifications
Model Name | AG4300 | ||
Engine |
|
|
|
Displacement | cu.in(cc) | 2.53 (41.5) | |
Maximum power kW(HP) | 1.5 (2.0) at 7000 rpm | ||
Carburetor | Diaphragm type (Walbro WYK) | ||
ignition system | ............................................................................................... | Electric (T.C.I) | |
Spark plug | NGK BPMR7A | ||
Starter | ............................................................................................................. | Recoil starter | |
Fuel |
| 2 cycle oil premixed gasoline (50:1 ) | |
|
|
| (when using ZENOAH genuine oil) |
Fuel tank capacity | fl.oz(lit) | 32 (0.94) | |
Transmission | Centrifugal clutch, worm gear reduction | ||
Gear box lubricant | ....................................................................................... | Gear oil | |
Reduction ratio | 45:1 | ||
Grip span in (mm) | ....................................................................................................... | 21.2 (540) | |
Over all dimensions |
| ||
Length | in (mm) | 24.8 (630) | |
Width | in (mm) | ....................................................................................................... | 14.4 (359) |
Height w/o drill | in (mm) | 11.7 (292) | |
Dry weight w/o drill | Ids (kg) | 19.3 (8.9) | |
Adaptable drill size |
|
| |
Diameter in (mm) | 0.8 to 8 (20 to 200) | ||
Specifications are subject to change without notice.
