NuTone WS3 manual Bottom cover, Electrical Cable Clamp

Page 3

 

 

 

 

ALLURE® WS3 SERIES

 

 

 

 

RANGE HOOD

 

 

 

 

 

 

®

 

 

 

 

 

 

 

 

 

 

Page 3

 

 

 

 

PREPARE THE HOOD

 

PREPARE THE HOOD

3

Remove

 

Teflon®-coated

 

bottom cover

 

from hood. Set

 

cover and

 

mounting

 

screws aside.

Teflon® is a registered trademark of DuPont.

4 Remove

Damper/Duct Connector from inside the hood. Set connector aside - with mounting screws and parts bag.

DAMPER/

DUCT

CONNECTOR

5 Remove either top or

back wiring knockout and install approved

Electrical

Cable Clamp.

TEFLON®-COATED BOTTOM COVER

(Held in place with 2 screws)

AIR CHUTE

7

Remove Air

 

Chute - held in

 

place with one

 

(1) screw.

NOTE: Be careful not to disconnect any wires.

8

Remove Baffle

 

from air chute.

BAFFLE

BAFFLE

ELECTRICAL CABLE CLAMP

Non-Ducted Installation - Skip to Step 15.

 

(3) #8 SCREWS

LIGHT

 

PANEL

The following

 

 

 

Steps (6 thru

(2) #8 SCREWS

 

 

 

14)are for

DUCTED INSTALLATION ONLY.

6 Remove Light Panel - held in place with (3) #8 screws and (2) #8 screws. Disconnect light assembly wire harness

(white connector).

9

10

Rotate baffle. Reinsert baffle into air chute (as shown) so that baffle tabs fit all the way into slots in air chute. An audible “click” will be heard when fully installed. This will close off the air flow through the non-ducted slots on top of hood.

SLOTS

Re-install air chute, re-connect wire harness, and replace light panel.

NOTE: Be careful not to trap wires between support fin and light panel.

TABS

SUPPORT FIN

Image 3
Contents For Domestic Cooking only Table of ContentsFilters Prepare Hood Location Prepare Hood LocationPrepare the Hood ¼ XElectrical Cable Clamp Bottom coverTo Top/Back Edge of hood Install Hood Connect WiringCleaning NON-DUCTED FiltersOperation KEY NO. Part no Service PartsNutone ONE Year Limited Warranty WarrantyContenido Para Cocinar Doméstico Solamente Advertencia PrecaucionPreparación DE LA Campana Deflector del Preparación DE LA CampanaCubierta inferior recubierta de Teflón de la Conducto paraColoque el regulador de tiro/conector del conducto sobre Vuelva a instalar la placa del conducto redondo deCon dos tornillos Conexión Eléctrica Filtros SIN Conductos OperaciónLimpieza Clave N.º Pieza N.º Piezas DE ServicioGarantia Nutone Limitada POR UN AÑO Garantia

WS3 specifications

The NuTone WS3 is a state-of-the-art wireless doorbell system that combines sleek design with advanced technology to enhance home connectivity and security. Designed for the modern homeowner, the WS3 offers a range of features that cater to convenience and ease of use.

One of the standout characteristics of the WS3 is its wireless connectivity. This allows for easy installation without the need for complicated wiring or electrical work. Simply mount the doorbell at your desired location, connect it to the wireless network, and you're ready to go. This flexibility makes it an ideal choice for renters or those looking to avoid DIY home improvement projects.

The WS3 comes equipped with a high-definition camera that provides clear visuals of visitors at your door. This feature not only enhances security by allowing homeowners to see who is approaching, but it also provides peace of mind when you’re away from home. The camera includes night vision capabilities, ensuring that you can monitor your entrance around the clock.

Another key feature of the NuTone WS3 is its two-way audio communication. This allows homeowners to interact with visitors in real-time, whether they are at home or away. The built-in microphone and speaker let you speak directly to the person at your door, which is especially beneficial for package deliveries or unexpected visits.

The WS3 also offers customizable chimes and notification settings. Users can select from a variety of sounds for different scenarios, ensuring that you'll never miss a visitor. These customizable options enhance the overall user experience and allow for personalization.

One notable technology incorporated into the WS3 is motion detection. The system can detect when someone approaches the door, sending instant alerts to your smartphone. This added layer of security helps keep homeowners informed about movement around their property, even if they do not frequently check their doorbell camera.

In addition to these features, the NuTone WS3 is backed by a robust mobile app that allows users to access all functionalities from the palm of their hand. The app provides live video feeds, recorded footage, and options for managing alert settings, further enhancing the convenience and control homeowners have over their home security.

With its blend of advanced technology, user-friendly interface, and stylish design, the NuTone WS3 stands out as an exceptional choice for anyone seeking a reliable and efficient wireless doorbell system. Whether you prioritize security, convenience, or aesthetic appeal, the WS3 delivers on all fronts, setting a new standard in home enhancement solutions.