NuTone ssQTXe080, ssQTXe110 Warranty, Models sSQTXE080 sSQTXE110 Restoring Power to control

Page 4

models sSQTXE080 • sSQTXE110

Restoring Power to control

Control stores all settings in nonvolatile memory; so they are not lost when power is removed. After power loss, control will automatically return fan to its state (on or off) before power was interrupted.

how to restore control Factory Settings

This “Restore” procedure clears control’s nonvolatile memory. It returns control to how it was shipped from factory. All links are removed and any Feature selection is turned off.

Links are unique for each device pair. If one end of the link is removed, it is important to remove the other end. “Restore” only removes links within the particular control. Other link-end needs to be removed in other control.

CAUTION: Master must be “Restored” if any Slave control is “Restored” or if any Slave control is removed from System. Master and all Slave links must be reestablished using “How To Link SmartSense® System” procedure.

1.Remove power from control’s “brain” by either: (a) turn circuit breaker off or (b) pull SET button until it stays extended by itself.

2.Wait 15-seconds.

3.Press and hold SET button.

4.For option (1a), turn circuit breaker on while SET button is pressed. For option (1b), push in and press SET button in one motion.

LED should be on while SET button is pressed.

5.Continue holding SET button for 3-seconds and then release it.

LED should turn off.

Page 

6.After less than 5-seconds, fan and LED turn on for 1 to 2-seconds and then turn off; which confirms “Restore” was successfully accomplished.

7.If control does not respond as described, start process over with step 1.

how to change control color

An almond paddle/frame assembly is included.

1.Use magnetic #1 Philips screwdriver and remove (4) screws from white paddle/frame.

2.Remove white paddle/frame from control.

Caution: Do not touch or put anything inside control housing; control damage may result.

3.Place almond paddle/frame on control.

4.Replace (4) screws and lightly tighten them.

Caution: Do not over tighten screws; frame may crack.

PADDLE / FRAME

ASSEMBLY

Push to turn ON

 

®

SCREWS

SCREWS

 

SmartSense®

Push to

turn OFF

warranty

BROAN-nutone ONE YEAR LIMITED WARRANTY

Broan-NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

During this one-year period, Broan-NuTone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service. THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS, TUBES, AND FUSES. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other than by Broan-NuTone), faulty installation or installation contrary to recom- mended installation instructions.

The duration of an implied warranty is limited to the one-year period as specified for the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

BROAN-NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT BROAN-NUTONE’S OPTION, SHALL BE THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. BROAN- NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.

To qualify for warranty service, you must (a) notify Broan-NuTone at the address or telephone number below, (b) give the model number and part identification and (c) describe the nature of any defect in the product or part. At the time of requesting warranty service, you must present evidence of the original purchase date.

Broan-NuTone LLC Hartford, Wisconsin www.broan.com 800-558-1711

99044470A

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Installation Models sSQTXE080 sSQTXE110HOW to link smartsense system Control operationHow System Works How LED worksModels sSQTXE080 sSQTXE110 How to set system Level Feature selectionsTable a Table bWarranty Models sSQTXE080 sSQTXE110 Restoring Power to controlHow to restore control Factory Settings How to change control colorAdvertencia InstalaciónModelos SSQTXE080 SSQTXE110 ImportanteFuncionamiento DEL Control Cómo Funciona EL SistemaCómo Funciona EL LED RED DE Calidad DE Aire Bajo TechoTabla a Selecciones DE FuncionesTabla B Cómo Restaurar LOS Ajustes DE Fábrica DEL Control GarantíaCómo Cambiar EL Color DEL Control

ssQTXe110, ssQTXe080 specifications

The NuTone ssQTXe080 and ssQTXe110 are advanced ventilation fans designed to enhance indoor air quality and improve the overall ambiance of any space. These models are particularly popular in residential bathrooms and kitchens, where moisture and odors can accumulate. Offering a well-rounded blend of efficiency, quiet operation, and modern features, these fans set a new standard in home ventilation technology.

One of the standout features of both the ssQTXe080 and ssQTXe110 models is their powerful airflow capability. The ssQTXe080 delivers a robust airflow of 80 CFM, while the ssQTXe110 pushes the upper limits with 110 CFM. This ensures that even in larger spaces, the air remains fresh and free of unpleasant odors and excessive humidity.

Noise levels are a crucial aspect when considering exhaust fans, and NuTone excels in this area. Both models operate at sound levels of just 0.8 sone for the ssQTXe080 and 1.0 sone for the ssQTXe110. This means users can enjoy a peaceful atmosphere, whether relaxing in the bath or preparing meals in the kitchen, without the distraction of a noisy fan.

Additionally, these fans feature a unique and innovative selection of technologies designed to optimize performance. Both models incorporate a durable and reliable DC motor, which not only enhances efficiency but also extends the overall lifespan of the fan. The energy-efficient design allows for significant energy savings, making them an eco-friendly addition to any home.

The ssQTXe080 and ssQTXe110 are easy to install, featuring a low-profile design and flexible mounting options. This allows homeowners and contractors to fit these fans seamlessly into various ceiling configurations. Moreover, they include an integrated damper that effectively prevents backdrafts, ensuring conditioned air remains inside while preventing outside air from entering.

Aesthetically, these models boast a sleek, contemporary design that complements most bathroom and kitchen decors. The white grille finish provides a clean look that can easily be painted to match the surrounding surfaces, further enhancing their integration into the home environment.

In summary, NuTone’s ssQTXe080 and ssQTXe110 ventilation fans stand out for their quiet operation, powerful airflow, energy-efficient technologies, and stylish design. These models not only contribute to a healthier indoor environment but do so while ensuring user convenience and satisfaction. Whether upgrading an existing setup or installing a new fan, the NuTone ssQTXe series is an excellent choice for modern homes.
Top Page Image Contents