NuTone WS2 warranty Electrical Cable Clamp, AIR Chute Baffle Slots Tabs, Light, Panel, Support FIN

Page 3

 

 

ALLURE® WS2 SERIES

 

 

RANGE HOOD

 

 

 

 

 

 

 

 

Page 3

PREPARE THE HOOD

 

PREPARE THE HOOD

ELECTRICAL

CABLE CLAMP

4 Remove either top or back wiring knockout and install approved Electrical Cable Clamp.

Ducted Installation - Skip to Step 11.

The following Steps (5 thru 10) are for

NON-DUCTED INSTALLATION ONLY.

6

Remove Air

 

Chute - held in

 

place with one

 

(1) screw.

NOTE: Be careful not to disconnect any wires.

7

Remove Baffle

 

from air chute.

 

Tabs will

 

disengage

 

from Slots.

AIR CHUTE

BAFFLE

SLOTS TABS

(3) #8 SCREWS

 

(2) #8 SCREWS

LIGHT

PANEL

5 Remove Light Panel - held in place with (3) #8 screws and (2) #8 screws. Disconnect light assembly wire harness

(white connector).

SUPPORT FIN

8 Rotate baffle. Reinsert baffle into air chute (as

shown) so that baffle fits all the way into into air chute. An audible “click” will be heard when fully installed.

This will direct air flow through the non-ducted slots on top of hood.

9 Re-install air chute and screw,

re-connect wire harness, and replace light panel.

NOTE: Be careful not to trap wires between Support Fin and light panel.

Image 3
Contents For Domestic Cooking only Table of ContentsFilters Damper Duct ConnectorPrepare Hood Location Prepare the HoodPanel Electrical Cable ClampAIR Chute Baffle Slots Tabs LightMetal Strip Plate SIDE-TO-SIDE Adjustment Damper Pivotduct ConnectorMotor Slots Stop Edge Screw TiesConnect Wiring Install Hood Cleaning NON-DUCTED FiltersOperation KEY NO. Part no Description Service PartsNutone ONE Year Limited Warranty WarrantyTable DES Matières AvertissementRaccord DE Conduit Avec Registre Préparez L’EMPLACEMENTPréparez LA Hotte Panneau Inférieur Avec EnduitSERRE-FILS DU Câble D’ALIMENTATION Ouverture Bord LimiteOuverture Préamorcée Supérieure Pour Conduit Rectangulaire Conduit AvecRuban Adhésif Pour Sceller LES Conduits Câble ’ALIMENTATION DU Panneau PrincipalVIS Verte DE Mise Terre Ouverture EN Forme DE VIS D’ASSEMBLAGE 4 Trou DE SerrureFiltres Sans Conduit FonctionnementEntretien 28 R501034 Autotransformateur avec vis d’assemblage Pièces DE RemplacementGarantie Limitée DE UN AN DE Nutone Garantie
Related manuals
Manual 16 pages 39.77 Kb

WS2 specifications

NuTone WS2 is a state-of-the-art wireless intercom system designed to enhance communication and convenience within a home. This innovative device seamlessly integrates advanced technologies and user-friendly features, making it a valuable addition to any modern household.

One of the main features of the NuTone WS2 is its wireless connectivity, which eliminates the need for cumbersome wiring. This allows users to place intercom units in various locations throughout the home without the hassle of installation complications typically associated with wired systems. The WS2 operates on a reliable frequency, ensuring clear audio transmission and minimal interference from other electronic devices.

The WS2's crystal-clear sound quality is one of its standout characteristics. Equipped with high-fidelity speakers, it provides crisp and clear audio, which is essential for effective communication. Whether users are talking from one room to another, checking in with family members, or broadcasting messages, the sound remains consistent and is easily understood.

Another significant technology incorporated into the NuTone WS2 is its user-friendly interface. With a simple touch-sensitive keypad, users can navigate through various functions, such as initiating a conversation, adjusting volume levels, and selecting different pre-set channels. This intuitive design ensures that individuals of all ages can operate the system effortlessly.

Additionally, the WS2 is equipped with a dedicated mobile app, which enhances its functionality. This innovative feature allows homeowners to communicate with the intercom system remotely via their smartphones. Users can receive alerts, make announcements, and even engage in conversations from anywhere within their Wi-Fi range, turning their mobile devices into effective communication tools.

The NuTone WS2's sleek, modern design fits seamlessly into contemporary home décor. Its compact form factor and aesthetically pleasing finish ensure that it complements the interior while remaining functional. Furthermore, the flexible mounting options allow users to choose their preferred setup, whether wall-mounted or placed on a countertop.

Security is also a key consideration in the design of the WS2. The system includes features to enhance home safety, such as the option to connect to existing security systems, ensuring that communication is not just limited to intercom tasks but also contributes to overall home monitoring.

In summary, the NuTone WS2 is a versatile and modern intercom system that combines wireless technology, exceptional sound quality, and user-friendly features. Its innovative design and capabilities make it an excellent choice for enhancing communication within any household.