NuTone important safety instructions Model 8663RFT

Page 1

To register this product, visit www.nutone.com

READ & SAVE THESE INSTRUCTIONS! INSTALLATION INSTRUCTIONS

Ventilation Fan

with Fluorescent Light

MODEL: 8663RFT

Suitable for use in shower or tub enclosure when used with GFI protected branch circuit.

Suitable for use in insulated ceilings.

WARNING: To reduce the risk of fire or electrical shock, do not use this fan with any solid-state speed control device. Do not install in a ceiling insulated to a value greater than R-40.

IMPORTANT SAFETY INSTRUCTIONS

WARNING  –  TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

A.  Use this unit only in the manner intended by the manufacturer.   If you have questions, contact the manufacturer.

B.  Before servicing or cleaning unit, switch power off at Service Panel and lock Service Panel to prevent power from being switched on accidentally.  When the service disconnecting means cannot be locked, securely fas- ten a prominent warning device, such as a tag, to the service panel.  CAUTION: 

  For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.

INSTALLATION INSTRUCTIONS

WARNING  –  TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

A.  Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.

B.  Sufficient air is needed for proper combustion and exhausting of gases through the flue (chimney) of fuel burning equipment to prevent back drafting. Follow the heating equipment manufacturer’s guideline and safety standards such as those published by the National Fire Protection Association (NFPA),  

and the American Society for Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.

C.  When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.

D.  Ducted fans must always be vented to the outdoors.

E.  If this unit is to be installed over a tub or shower, it must be marked as appropriate for the application.

F.  NEVER place a switch where it can be reached from a tub or shower. G. For installation in sloped ceilings up to 12/12 pitch.

H. Ductwork must point up.

FOR BEST RESULTS

When installing the Exhaust Fan/Light in a new construction site, install housing during the rough‑in construction of the building. The blower unit, reflector and grille should be installed after the finished ceiling is in place.

Refer to instructions on page 3 to install the Exhaust Fan/Light in an exist- ing finished building.

PLANNING DUCTWORK AND WIRING

1.  Use 4” round duct.

2.  Plan duct run from discharge opening of fan to the outside. For best fan performance, make duct run as short as possible and use minimum num- ber of elbows.

3.  Use optional NuTone ducting accessories as needed.

 

Duct

Hanger Bars

Collar

 

 

Wiring

 

Knockouts

 

Housing

Slots

Scroll

 

 

Power/Blower

Tabs

Unit

 

 

Reflector

 

Assembly

 

Acorn Nut

 

Mounting

 

Springs (2)

 

Grille/Lens

 

Assembly

 

FIGURE 1

 IMPORTANT: Use wire suitable for 90°C.

 Plan to run 120vAC house wiring (with ground) from power source, through wall switches, to junction box in fan. For separate control of fan and light, two wall switches are required. See NuTone Catalog for accessory switches.

INSTALLATION IN A NEW

CONSTRUCTION SITE

PREPARATION

1.  Refer to Figure 1. Remove power unit/blower assembly from housing. A.  Unplug power unit.

B.  Remove screw (located next to plug‑in receptacle) which holds power/ blower unit mounting plate in place. Save screw.

C.  Lift mounting plate at end near the plug‑in receptacle until blower wheel clears the scroll.

D.  Remove plate by pulling its tabs out of slots in housing. Set power/ blower unit aside until needed.

2.  Remove one of the wiring knockouts from housing.

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Model 8663RFT Installing Ductwork Mounting the HousingWiring Completing Installation POWER/BLOWER Unit InstallationInstallation in Existing Construction Cleaning and RelampingModele 8663RFT Montage DU Boitier Installation DE LA GaineCablage Avec Pattes DE FixationPour Finir L’INSTALLATION Installation DU BLOC-MOTEURInstallation Dans UNE Construction Exisatante Nettoyage ET Remplacement DE LA LampeInstrucciones DE Instalacion Modelo 8663RFTPara Obtener Mejores Resultados Planificacion DEL Conducto Y CableadoInstalacion DEL Conducto Montaje DE LA CajaCableado CON LenguetasPara Terminar LA Instalacion Instalacion DE LA Unidad DE POTENCIA/SOPLADORLimpieza Y Cambio DE Bombillas Merchantability or Fitness for a Particular Purpose If YOU Need Assistance or Service ContactMarchandibilité OU D’ADAPTATION À UN Usage Particulier SI Necesita Asistencia O Serivivio ContactoService Parts 99044360A

8663RFT specifications

The NuTone 8663RFT is a versatile and highly functional range hood that has become a popular choice among homeowners looking for efficiency and style in their kitchen. This model combines modern technologies with sleek design, making it a point of interest for culinary enthusiasts and home cooks alike.

One of the standout features of the 8663RFT is its powerful ventilation system. Equipped with a robust 350 CFM ventilation power, it ensures that smoke, odors, and grease are effectively removed from the kitchen environment. This is especially beneficial during heavy cooking sessions, as it helps maintain a fresh and clean atmosphere.

The 8663RFT features a unique three-speed fan, allowing users to customize the airflow according to their cooking needs. With this flexibility, the range hood can handle everything from gentle simmering to intense frying, catering to a variety of culinary activities. Additionally, the sleek push-button controls are user-friendly, allowing for easy adjustment even with greasy fingers.

Another impressive characteristic of the NuTone 8663RFT is its integrated lighting system. This range hood comes with two built-in, halogen lights that provide excellent illumination over the cooking surface. This feature not only enhances visibility but also adds a touch of ambiance to the kitchen during evening cooking sessions.

The design of the 8663RFT is equally noteworthy. Its stainless steel finish gives a modern and elegant look that blends seamlessly with most kitchen decors. With a low-profile, under-cabinet design, it saves space while providing high functionality. This model is also designed with a dishwasher-safe aluminum grease filter, allowing for easy maintenance and ensuring that the unit operates at optimal performance for years to come.

In terms of installation, the NuTone 8663RFT offers flexibility, as it can be adapted for ducted or ductless operation—an important consideration for kitchens without external venting. By offering both recirculating and external ventilation options, it caters to a wide range of kitchen configurations.

Overall, the NuTone 8663RFT range hood stands out for its combination of power, efficiency, and aesthetic appeal. Whether you are a novice cook or a seasoned chef, this model is designed to meet the demands of any kitchen while enhancing the overall cooking experience. Its advanced features and user-oriented design make it a worthy investment for anyone looking to elevate their cooking environment.
Top Page Image Contents