NuTone 769RF POWER/BLOWER Unit Installation, Completing Installation, Single Switch, Control

Page 3

WIRING

Refer to Figures 5 and 6.

All wiring must comply with local codes and unit must be properly grounded.

1.Run 120vAC house wiring (with ground) from wall switch to fan location.

2.Insert and secure an approved box connector into wiring entrance hole.

3.Pull wires through box connector and into junction box. Tighten box connector.

4.If a single switch will be used to control both the fan and the light, make wiring connections as shown in Figure 5. If a double switch will be used for separate control of the fan and light, make connections as shown in Figure 6.

NOTE: If a double switch is used, the wiring connections determine which receptacle will b e used for the fan motor plug and which receptacle will be used for the light plug. Make note of this when making the wiring connections.

5.Connect the green (or bare) ground wire to the green ground lead.

POWER/BLOWER UNIT INSTALLATION

Refer to Figure 7.

1.Place power/blower unit into housing so that mounting plate's tabs insert into slots in housing.

2.Press other end of mounting plate down until it is firmly seated over scroll and plug-in receptacles.

3.Secure mounting plate to housing with provided screw.

4.Insert motor plug into junction box receptacle.

COMPLETING INSTALLATION

Refer to Figure 8.

1.Remove wing nut from the threaded bolt on motor mounting strap.

2.Place reflector into grille.

3.Align grille/reflector assembly with housing and insert light plug into receptacle in junction box.

4.Using wing nut, secure grille/reflector assembly to motor mounting strap.

5.Install lamp NEMA type CFQ13W/GX23/827 (not provided) into socket.

6.Install lens by squeezing both sides and inserting lens tabs into slots in grille.

MOUNTING

PLATE

SLOTS

INSERT TABS

INTO SLOTS

MOTOR PLUG

FIGURE 7

GRILLE

SINGLE SWITCH

CONTROL

BLACK

WHITE

120vAC

GROUND

 

FIGURE 5

DOUBLE SWITCH

CONTROL

BLACK

WHITE

BLACK

 

 

120vAC

GROUND

 

 

FIGURE 6

LAMP SOCKET

REFLECTOR

FAN PLUG

LIGHT PLUG

FIGURE 8

Image 3
Contents Important Safety Instructions Installation InstructionsFor Best Results Planning Ductwork and Wiring Installation in a NEW Construction SiteMounting the Housing Double Switch POWER/BLOWER Unit InstallationCompleting Installation Single SwitchInstallation in Existing Construction InstallationPlanning Part Description MarchFAN Date GroupInstructions DE Securite Importantes Instructions D’INSTALLATIONCâblage Installation Dans UN Nouveau Site DE ConstructionInstaller LA Gaine Montage DE LA Canalisation ET CâblageFIN DE L’INSTALLATION Installation DE L’UNITE DE COURANT/VENTILATEURCâblages ET Canalisation Installation Dans UNE Construction ExistanteProduct No Actuel DEDescription DE LA Piece Utilise SUR Model

769RF specifications

The NuTone 769RF is a versatile and powerful ventilation fan designed to improve indoor air quality while providing essential lighting features. Renowned for its sleek design and efficient performance, the 769RF is an excellent addition to any home, particularly in bathrooms, kitchens, or laundry rooms where moisture and odors can accumulate.

One of the standout features of the NuTone 769RF is its impressive airflow capacity of 110 CFM (cubic feet per minute). This robust performance ensures that spaces are kept well-ventilated, rapidly removing excess humidity and odors while promoting a healthier environment. Additionally, the fan operates at a low noise level of just 1.5 sones, making it ideal for areas where quiet operation is essential, such as during late-night bathroom trips or in bedrooms.

The NuTone 769RF is equipped with two bright 60-watt incandescent light bulbs, providing efficient and effective illumination. The fixture's glass lens and decorative design not only enhance the aesthetic appeal of the space but also ensure that the light is evenly distributed. The combination of ventilation and lighting makes it an all-in-one solution for homeowners looking to modernize their bathrooms or other areas.

In terms of installation, the NuTone 769RF is designed for easy and flexible mounting. Its compact housing allows it to fit snugly between ceiling joists, making installation hassle-free for both DIY enthusiasts and professional contractors. The fan can be wired to a standard wall switch, enabling users to control both the fan and the light with ease.

Durability is another key characteristic of the NuTone 769RF. Constructed with high-quality materials, this fan is built to withstand the rigors of daily use, including exposure to moisture. Its reliable performance and energy efficiency meet the needs of modern homeowners seeking sustainable solutions.

Overall, the NuTone 769RF combines efficiency, aesthetics, and functionality. With its powerful ventilation capability, elegant lighting, low noise levels, and user-friendly installation process, this model stands out as a top choice for those aiming to enhance their indoor air quality while maintaining an inviting ambiance.