Description, Design Features | NuTone 9093 SERIES instruction

Architectural & Engineering Specifications March 2004

DESCRIPTION

•Combination Fan-Forced Heater, Ventilator and Ceiling Light provides comfort, convenience and long-lasting dependability.

•Electronically balanced centrifugal blower wheel forces heat evenly throughout the room.

•Automatic reset thermal protection.

•Expansion-type hanger bars for joists up to 24" o.c.; mounting brackets adjust for up to 3⁄4" plaster thickness.

•Detachable junction box features three (3) wiring knockouts.

•One-piece diecast grille with pebble-texture bezel is available in a choice of three finishes: Polished Brass, Chrome or White Enamel. 8" diameter glass lens extends only 3" from ceiling.

•Available as energy efficient fluorescent unit – Model 9093FWH. Uses 26 watt Nema Type CFM26W/GX24D/827 fluorescent lamp. Light output equal to 100 watt incandescent (1,800 lumens). Other units use one (1) standard 100 wall bulb. Purchase bulbs locally.

•All units include night light feature – 0ne (1) 7 watt bulb (not included).

•Connects to standard 4" round duct.

•Wall switch with separate on/off controls for all four functions is included with each unit. Or, may be used with any standard in-line thermostat to control the heat cycle.

•Refer to NuTone's catalog for a complete line of accessories to effectively adapt this unit to your construction requirements.

DESIGN FEATURES

Air Delivery:	70 CFM.
Sound Level:	3.5 Sones
Electrical Rating: 120 volts, 1717 watts
Dimensions:	Housing: 131⁄4" diameter x 71⁄2" deep.
	Grille: 153⁄8" diameter x 3" extension
	from ceiling.
	Reflector: 7" diameter.
	Lens: 8" diameter.
Material & Finish:	Housing: Galvanized steel.
	Grille: Die-cast zinc with Polished
	Brass, Chrome or White Enamel
	finish.
	Reflector: Steel with white enamel
	finish.
	Lens: Glass.
Motor:	Ventilator: Thermally protected.
	Heater: Thermally protected.
Impeller:	Ventilator: (1) Aluminum.
	Heater: (1) Aluminum.
Heating Element:	Nickel-chrome, open coil 1500w.
Duct Size:	4" round.

Deluxe Heat-A-Ventlite®

MODEL: 9093 SERIES

9093 Series

INSTALLATION

•Detailed installation instructions are included with each unit.

ARCHITECT'S SPECIFICATIONS

Heat-A-Ventlite®shall be Model Number (specify) as manufactured by NuTone according to listed specifications.

Specify Model Number:

Model Number	Grille Finish
9093FWH	White Enamel
9093BR	Polished Brass
9093CH	Chrome
9093WH	White Enamel