NuTone 671R, 672R POWER/BLOWER Unit Installation, Grille Installation, One Year Limited Warranty

Page 3

POWER/BLOWER UNIT INSTALLATION

1.Place power/blower unit into housing so that mounting plate’s tabs insert into slots in housing.

2.Press other end of mounting plate down until it is firmly seated over scroll and plug-in receptacles.

3.Secure mounting plate to housing with provided screw.

4.Refer to Figure 5. Insert motor plug into junction box receptacle.

GRILLE INSTALLATION

1.Refer to Figure 6. Squeezing grille’s mounting springs together, insert springs into slots on both sides of the housing.

2.Press grille firmly into place against ceiling.

INSTALLATION IN EXISTING

CONSTRUCTION

Note: Installation in a finished house requires at least a small accessible area (attic or crawl space) above the planned installation location.

1.After determining desired location for fan, drill a small hole in the ceiling. Place a coat hanger or other stiff wire up through hole to help in locating from above.

2.Place fan housing on top of ceiling surface and use the housing as a template to mark area to be cut out.

3.After cutting out opening, mount housing in the opening using the hanger bars (sold separately), or mount directly to joist using mounting tabs.

A.Insert hanger bars in slots in housing.

B.Position housing in opening so that bottom of housing is flush with ceiling.

C.Use screws or nails (not provided) to secure hanger bars to ceiling joists.

D.Complete installation as described above.

INSERT TABS

INTO SLOTS

LES INSÉRER PATTES

LES FENTES

FIGURE 5

Product specifications subject to change without notice.

4820 Red Bank Road, Cincinnati, Ohio 45227

Printed in the U.S.A., Rev. 1/03, Part No. 87597

 

SLOTS

 

FENTES

MOUNTING

GRILLE

LA

SPRINGS

GRILLE

RESSORT

 

DE

 

MONTAGE

 

 

FIGURE 6

One Year Limited Warranty

WARRANTY OWNER: NuTone warrants to the original consumer purchaser of its products that such products will be free from defects in materials or workmanship for a period of one (1) year from the date of original purchase. THERE ARE NO OTHER WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE.

During this one year period, NuTone will, at its option, repair or replace, without charge, any product or part which is found to be defective under normal use and service. THIS WARRANTY DOES NOT EXTEND TO FLUORESCENT LAMP STARTERS OR TUBES, FILTERS, DUCT, ROOF CAPS, WALL CAPS AND OTHER ACCESSORIES FOR DUCTING. This warranty does not cover (a) normal maintenance and service or (b) any products or parts which have been subject to misuse, negligence, accident, improper maintenance or repair (other than by NuTone), faulty installation or installation contrary to recommended installation instructions.

The duration of any implied warranty is limited to the one year period as specified for the express warranty. Some states do not allow limitation on how long an implied warranty lasts, so the above limitation may not apply to you.

NUTONE’S OBLIGATION TO REPAIR OR REPLACE, AT NUTONE’S OPTION, SHALL BE THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS WARRANTY. NUTONE SHALL NOT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES ARISING OUT OF OR IN CONNECTION WITH PRODUCT USE OR PERFORMANCE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.

WARRANTY SERVICE: To qualify for warranty service, you must

(a)notify NuTone at the address stated below or telephone 1/800-543-8687, (b) give the model number and part identification and (c) describe the nature of any defect in the product or part. At the time of requesting warranty service, you must present evidence of the original purchase date.

Date of Installation

Builder or Installer

Model No. and Product Description

IF YOU NEED ASSISTANCE OR SERVICE:

For the location of your nearest NuTone Independent

Authorized Service Center:

Residents of the contiguous United States Dial Free 1-800-543-8687

Please be prepared to provide:

• Product model number • Date and Proof of purchase

The nature of the difficulty

Residents of Alaska or Hawaii should write to: NuTone Inc.

Attn: Department of National Field Service, 4820 Red Bank Road, Cincinnati Ohio 45227-1599.

Residents of Canada should write to: Broan-NuTone Canada,

6300 Tomken Road,Mississauga, Ontario, Canada L5T 1H9.

Rev. 03/2001

Image 3
Contents Models 671R & 672R Important Safety InstructionsInstallation Instructions Exhaust FanWiring Planning Ductwork and WiringMounting the Housing Installing DuctworkOne Year Limited Warranty POWER/BLOWER Unit InstallationGrille Installation Installation in Existing ConstructionModeles 671R et 672R Ventilateur d’évacuationInstallation Dans UNE Construction Existante Installation DE LA GaineInstallation DU Moteur Installation DE LA GrilleOriginal Model Used on Current Part Description DecemberFAN Date Group

671R, 672R specifications

The NuTone 672R and 671R are advanced ventilation fan models designed to enhance indoor air quality while providing effective and reliable performance. Both models are popular choices for residential applications, offering unique features and technological advantages tailored to meet the needs of modern homeowners.

One of the main features of the NuTone 672R and 671R models is their powerful airflow capabilities. The 672R delivers an impressive CFM (cubic feet per minute) rating, making it suitable for larger bathrooms and spaces where efficient air exchange is essential. The 671R, while slightly less powerful, still offers substantial airflow and is ideal for smaller rooms. This ensures that excess moisture and odors are effectively removed, promoting a healthier indoor environment.

Both fans are designed with quiet operation in mind. NuTone incorporates a specially designed motor and innovative sound-dampening technology that significantly reduces noise levels during operation. This allows homeowners to enjoy the benefits of ventilation without the disruptive sound often associated with traditional exhaust fans. As a result, these models are perfect for use during nighttime or in tranquil spaces, such as bedrooms and reading nooks.

In addition to effective ventilation, the NuTone 672R and 671R feature an easy-to-install design. The fans come with a compact housing that fits into tight spaces, ensuring a seamless installation process. The inclusion of a durable and efficient motor contributes to the longevity of the fans, requiring less frequent maintenance and replacement.

Another essential aspect of these models is their energy efficiency. Both the 672R and 671R are designed to consume minimal power while delivering optimal performance. This energy-efficient operation not only helps reduce utility bills but also aligns with eco-friendly practices, making these fans a responsible choice for environmentally conscious homeowners.

Additionally, these fans come with built-in adjustable features, allowing users to customize the airflow according to their specific needs. The integrated switch options allow for easy control over ventilation levels, enabling optimal comfort throughout the home.

In summary, the NuTone 672R and 671R fans are exemplary ventilation solutions that combine powerful airflow, quiet operation, energy efficiency, and user-friendly features. These characteristics make them a preferred choice for homeowners seeking reliable and effective ventilation in their living spaces.