Removing the filter, Replacing the Light Bulb

17 PROLINE RANGE HOODSUSER manual 17

CARE & CLEANING

REPLACING THE LIGHT BULB

♦♦ Make sure the range hood is unplugged or turn OFF breaker

♦♦ Place a flat-head screwdriver between light cover and housing to remove cover ♦♦ Gently pull defective bulb straight out and discard

♦♦ Wear a cotton glove or use a cloth to handle the replacement bulb (DO NOT handle with bare fingers as this may shorten the life of the bulb)

♦♦ Push gently but securely into light socket. (DO NOT push too hard as bulb legs may break off)

♦♦ Replace light cover

♦♦ Turn ON breaker and range hood to test operation

removing the filter

♦♦ The filter (A) is located on the bottom of the hood, directly above the cooking surface.

♦♦ Hold the filter in place with one hand and pull back on the release lever (B) with the other.

♦♦ While pulling back on the release lever, lower the filter out of the hood. On hoods with more than one filter, remove, clean and replace all of the filters.