Kobe Range Hoods RA3830SQD, RA3836SQD manual

Page 10

Mounting

Screws

Figure 7

5.Align hood-mounting bracket to the two screws on the wall and hook hood into p Tighten screws to secure hood to the wall. CAUTION: MAKE SURE THE HOOD IS SECURE BEFORE RELEASING.

Duct Cover Installation

6.Mark the position of the duct cover-mounting bracket. EUsefromreferenceTable 2 and measurements on page14. Attach and secure duct cover-mounting bracket with tw screws (not provided). Refer to Figure 9. NOTE: Inner duct cover will cover cover-mounting bracket.

7.Connect electrical wires. Refer to ￿Wiring to Power Supply.￿ If necessary to electrical wire connections, push wires back into the wiring box. Access the connections underneath the hood by removing the bottom casing. Before reattac bottom casing, make sure wires do not slip between motors, impellers, or any m parts to prevent any damage. NOTE: Be careful when using electrical screwdri damage to the hood may occur.

8.Slide the inner duct cover up 2 inches before sliding entire duct cover onto t Refer to Figure 10.

Figure 9

9.Adjust the height of the inner duct cover to the duct cover-mounting bracket. inner duct cover with two (4x8 mm) screws (provided) as shown in Figure 11.

8

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Kobe Brand Range Hood Read and Save These Instructions Please Read this Section Carefully Before Installation Important Safety InstructionsActivating any switch may cause ignition or an explosion What to Do In The Event Of a Range Top Grease FireComponents of Package For Under the Cabinet InstallationPlease Read Entire Instructions Before Proceeding 27 to = Height of Hood = Height of the CabinetUnder the Cabinet Installation Safety Warning Preparation before InstallationWiring to Power Supply Check all lights and fan operation. for the homeownerStand Alone Installation Page Attach Together Operating Instructions Power Control On/Off. Refer to FigureTurn On Maintenance Top rack dishwasher safeReplace protective cover Plug in range hood Specifications All measurements in are millimeters Measurements & DiagramsHood-Mounting Bracket Model NO. RA3830SQD RA3836SQD Parts ListOptional Duct Cover Model NO. RA3830SQD RA3836SQD Circuit Diagram Disclaimer Claims will not be Accepted After the Allocated DaysTWO-YEAR Warranty Service Period WarrantyWarranty Certificate This warranty applies only Within U.S.A. and CanadaConsequential Damage ServiceMAY not Apply to YOU Implied WARRANTIES/STATE LAW Record the Following Information for Your Record Product RegistrationRegister Your Product Model No

RA3836SQD, RA3830SQD specifications

Kobe Range Hoods presents an impressive line of ventilation solutions that elevate kitchen design and functionality. Among their standout models are the RA3830SQD and RA3836SQD, both designed to efficiently eliminate smoke, odors, and grease from your cooking space, ensuring a fresh and clean environment.

The RA3830SQD and RA3836SQD are part of Kobe's signature collection, featuring a sleek, modern design that seamlessly integrates into various kitchen aesthetics. Available in 30-inch and 36-inch widths respectively, these range hoods cater to different kitchen configurations and personal preferences, making them versatile choices for many homeowners.

One of the standout features of both models is their powerful yet quiet performance. Equipped with a dual blower system, they offer exceptional suction capabilities, ensuring that even the most aromatic meals are cleared from the air quickly. The noise level is impressively low, operating at mere decibels, which allows for a pleasant cooking experience without the distraction of a loud fan.

Kobe’s range hoods also come with multiple speed settings, providing flexibility based on cooking intensity. The convenient push-button controls make it easy to adjust the fan speed on the fly, catering to different cooking methods, whether you’re searing, simmering, or frying.

Incorporating advanced engineering, both the RA3830SQD and RA3836SQD feature a stainless steel construction that not only adds a professional aesthetic but ensures durability and easy cleaning. The filters are designed to capture grease effectively while being dishwasher-safe, simplifying maintenance.

Another remarkable technology is the eco-friendly LED lighting system, providing bright, energy-efficient illumination over your cooking surface. This feature not only enhances visibility when preparing meals but also adds to the overall ambience of the kitchen.

Furthermore, the range hoods include a delay-off function, which allows them to continue operating for a brief period after cooking has finished. This ensures any lingering smoke or odors are eliminated, further enhancing air quality.

In conclusion, the Kobe Range Hoods RA3830SQD and RA3836SQD embody a combination of style, performance, and innovation, making them an excellent choice for any modern kitchen. Their powerful ventilation capabilities, ease of use, and elegant design create an ideal environment for culinary enthusiasts and home cooks alike.
Top Page Image Contents