Preparation before Installation

NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING.

Decide the location of the venting pipe from the hood to the outside. (Figure 1)

A straight, short venting run will allow the hood to perform more efficiently.

Try to avoid as many transitions, elbows, and long run as possible. This may reduce the performance of the hood.

Temporarily wire the hood to test for proper operation before installing

Important: Peel any protective film off the hood.

Use duct tape to seal the joints between pipe sections.

If necessary, prepare back wall frame with cross framing lumber for secure installation. Refer to Table 1 and measurements on Page 5 to decide the level of the lumber. (Figure 2)

Attach ducting transition to hood exhaust with eight (3/16” x 3/8”) screws (included).

Loosen hood-mounting brackets at the back of the hood, adjust brackets and tighten screws as shown in Figure 3.

If necessary, remove the rubber stand on the back of the hood and discard. (Figure 4)

Figure 1

Figure 2

Figure 3

Figure 4

RA0236SQB, RA0230SQB, RA0242SQB, RA0248SQB specifications

Kobe Range Hoods offers a versatile selection of kitchen ventilation solutions, with models like the RA0236SQB, RA0242SQB, RA0230SQB, and RA0248SQB. These hoods are designed not only for their aesthetic appeal but also for maximizing kitchen comfort through advanced technology and superior performance.

One of the standout features of the Kobe Range Hoods is their powerful motor system. Each of these models is equipped with a high-performance, quiet, yet powerful 3-speed blower. This allows homeowners to choose the ideal ventilation speed based on their cooking needs, ensuring that smoke, steam, and cooking odors are efficiently eliminated from the kitchen environment while minimizing disruptive noise.

Moreover, all four models are constructed from high-quality stainless steel, which enhances durability and provides a sleek, modern look that complements any kitchen decor. The stainless steel finish also makes these hoods easy to clean, ensuring that they maintain their aesthetic appeal even after extended use.

In terms of design, the RA0236SQB, RA0242SQB, RA0230SQB, and RA0248SQB range hoods feature a contemporary style with seamless weld joints and an elegant canopy that adds a touch of sophistication to the kitchen. Their under-cabinet design is not only space-saving but also ensures easy integration with existing cabinetry.

An essential feature of these range hoods is the LED lighting, which provides excellent illumination over the cooktop, enhancing visibility while cooking. The energy-efficient LED lights consume less energy and offer a longer lifespan compared to standard bulbs.

Additionally, these models incorporate baffle filters that are dishwasher-safe, making maintenance a breeze. The baffle filters are designed to effectively capture grease and other particles, ensuring that the cooking area remains clean and safe from fire hazards.

Kobe's range hoods also stand out due to their versatile installation options, suitable for ducted or ductless configurations, depending on the kitchen's setup. This flexibility makes them an ideal choice for various kitchen layouts and personal preferences.

Overall, the Kobe Range Hoods RA0236SQB, RA0242SQB, RA0230SQB, and RA0248SQB models showcase a perfect blend of performance, style, and convenience. They are designed to cater to modern cooking needs while enhancing the overall kitchen experience, making them a worthy addition to any culinary space.