Kobe Range Hoods RA0236SQB, RA0248SQB, RA0242SQB Trouble Shooting, Issue Possible Cause Solution

Page 23

TROUBLE SHOOTING

Issue

Possible Cause

Solution

After Installation,

The power is not on.

Make sure the circuit breaker and the unit’s power is

both motors and

 

ON. Use a voltage meter to check the power supply.

lights are not

The wire connection is not secure.

Check and tighten wire connection.

working.

The control panel and processor board

Check wire continuity from control panel to processor

 

wiring are disconnected.

board.

 

The motor transformer is defective.

Check the power input and power output on the

 

 

motor transformer.

 

 

If it’s needed, replace the motor transformer.

 

 

 

 

The control panel and processor board is

Replace the control panel or processor board.

 

defective.

 

Lights are

The motor(s) is defective.

Replace the motor.

working, but

The capacitor(s) is defective.

Replace capacitor(s).

motor(s) is not.

The control panel or processor board is

Replace the control panel or processing board.

 

defective.

 

The range

The blower system is not secure.

Tighten the turbine impeller/squirrel cage and air

hood is

 

chamber.

vibrating.

The turbine impeller/squirrel cage is

Replace the turbine impeller/squirrel cage.

 

not balanced.

 

 

Hood is not secured in place.

Check the installation of hood, tighten the

 

 

mounting bracket.

The motor is

Halogen Light bulb(s) is defective.

Try placing the trouble light bulb(s) to a working

working, but

 

socket, if the bulb(s) still doesn’t work; replace

the lights are

 

the halogen light bulb(s).

not working.

The light wiring(s) is loose.

Check wire continuity from processor board to

 

 

light transformer to halogen light housing(s).

 

Light transformer is defective.

Check power input and power output on the light

 

 

transformer. If it’s needed, replace the light

 

 

transformer.

 

The control panel or processor board is

Replace the control panel or processing board.

 

defective.

 

 

 

 

The range

The range hood is installed outside of

Adjust the clearance between the range hoods

hood is not

the manufacture recommended

and cook top to 27” to 30”. For Island range

venting out

clearance.

hood and professional series range hood, the

correctly.

 

clearance between the range hoods and cook

 

 

top is 30” to 36”.

 

There is no make-up air inside the

Open the window to enhance the performance

 

house.

of the range hood by creating a sufficient make-

 

 

up air.

 

Obstacle blocking the pipe work.

Remove all obstacles from the duct work.

 

 

 

 

The pipe size is smaller than the

Change the ducting according to the

 

suggested pipe size.

manufacture suggestion.

Cold air is

The pipe connection is not properly

Check the pipe installation.

coming into the

sealed.

 

home.

 

 

20

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Kobe Brand Range Hood Page English English ContentsTOP Grease Fire Important Safety InstructionsWhat to Do If You Smell Gas What to Do In The Event Of a Range Top Grease FireMust keep all material for returns or refunds Components of PackageCalculation before Installation InstallationPreparation before Installation Wiring to Power Supply Duct Cover Installation Operation Instructions LCD Display Standby ModeHood Operation General SetupTurning Lights on Setting Timer ModeSetting Delay Mode Turning ISC Integrated Sensor Control ON/OFFTo Clean Baffle Filter/Oil Tunnel MaintenanceTo Clean Hood Surface Replacing Light Bulb Speed SpecificationsModel NO. RA0230SQB RA0236SQB RA0242SQB RA0248SQB Measurements & DiagramsDescription Model /SIZE Parts ListModel NO. RA0230SQB RA0236SQB Model NO. RA0242SQB RA0248SQB Circuit Diagram Issue Possible Cause Solution Trouble ShootingClaims will not be Accepted After the Allocated Days DisclaimerConditions WarrantyWarranty Certificate TWO-YEAR Warranty Service PeriodImplied WARRANTIES/STATE LAW ServiceConsequential Damage Record the Following Information for Your Record Product RegistrationRegister Your Product Table DES Matières FrenchCouper LE Courant Électrique SUR LE Tableau DE Distribution Consignes DE Sécurité ImportantesQue faire si une odeur de gaz se dégage Que faire en cas dun incendie de graisse sur la cuisinièreSupport de fixation hotte Ensemble de vis Contenu DE L’EMBALLAGEMesures à prendre avant linstallation SVP Lire AU Complet Avant LinstallationPhoto Pénétrer Dans Louverture DE VentilationConsigne DE Sécurité Raccordement AU Réseau DE Conduits Appuyer SUR Pour Mettre EN Marche OU Arrêter LA Hotte Mode DemploiMise EN Marche DE LA Hotte Réglage DE BaseRéglage de la minuterie Réglage du mode différéMise en marche du détecteur intégré Mise en marche des lampesNettoyage Des Surfaces De La Hotte Entretien PréventifRemplacement Dune Ampoule Vitesse SpécificationsRA0236SQB RA0242SQB RA0248SQB Mesures ET SchémasNos de modèles RA0230SQB Liste DES PiècesRA0230SQB Nos de modèlesRA0242SQB Schéma DE Câblage Problème Cause probable Solution Avis DE NON-RESPONSABILITÉ Période DE Garantie DE Deux 2 ANS GarantieCertificat DE Garantie Garanties Tacites / Réglementation Dommages IndirectsInscrire LES Renseignements Suivants Pour NOS Dossiers Enregistrement DU ProduitEnregistrez votre produit Spanish Instrucciones Importantes DE Seguridad Qué Hacer si Siente Olor a Gas PrecauciónPaquete de Tornillos Soporte de Montaje para la Campana Componentes DEL PaqueteCampana Mínimo de 30 a InstalaciónCálculo antes de la Instalación Mostrador a Parte Inferior de laImportante Retire la película protectora de la campana Preparación antes de la InstalaciónCableado Hacia la Fuente de Alimentación Instalación de la Cubierta de Conductos Pantalla LCD Standby Instrucciones DE OperaciónFuncionamiento DE LA Campana Configuración GeneralPara Encender las luces Configurando el modo de CronómetroConfigurando el Modo de Retraso Para limpiar el Filtro Deflector/Conductos de Aceite MantenimientoLimpieza de la Superficie de la Campana Para Reemplazar el Foco Velocidad Especific AcionesModelo NO. RA0230SQB RA0236SQB RA0242SQB RA0248SQB Medidas Y DiagramasModelo no RA0230SQB RA0236SQB RA0242SQB RA0248SQB Listado DE PiezasModelo no RA0230SQB RA0236SQB Modelo no RA0242SQB RA0248SQB Diagrama DE Circuito Problema Posible Causa Solución Cláusula DE Exención Condiciones GarantíaCertificado DE Garantía Periodo DE Servicio DE LA Garantía DE DOS AñosServicio Daños EmergentesGarantías IMPLÍCITAS/LEY Estatal Escriba LA Siguiente Información Para SUS Archivos Registro DEL ProductoRegistre su Producto Information subject to change without notice VER.091209

RA0236SQB, RA0230SQB, RA0242SQB, RA0248SQB specifications

Kobe Range Hoods offers a versatile selection of kitchen ventilation solutions, with models like the RA0236SQB, RA0242SQB, RA0230SQB, and RA0248SQB. These hoods are designed not only for their aesthetic appeal but also for maximizing kitchen comfort through advanced technology and superior performance.

One of the standout features of the Kobe Range Hoods is their powerful motor system. Each of these models is equipped with a high-performance, quiet, yet powerful 3-speed blower. This allows homeowners to choose the ideal ventilation speed based on their cooking needs, ensuring that smoke, steam, and cooking odors are efficiently eliminated from the kitchen environment while minimizing disruptive noise.

Moreover, all four models are constructed from high-quality stainless steel, which enhances durability and provides a sleek, modern look that complements any kitchen decor. The stainless steel finish also makes these hoods easy to clean, ensuring that they maintain their aesthetic appeal even after extended use.

In terms of design, the RA0236SQB, RA0242SQB, RA0230SQB, and RA0248SQB range hoods feature a contemporary style with seamless weld joints and an elegant canopy that adds a touch of sophistication to the kitchen. Their under-cabinet design is not only space-saving but also ensures easy integration with existing cabinetry.

An essential feature of these range hoods is the LED lighting, which provides excellent illumination over the cooktop, enhancing visibility while cooking. The energy-efficient LED lights consume less energy and offer a longer lifespan compared to standard bulbs.

Additionally, these models incorporate baffle filters that are dishwasher-safe, making maintenance a breeze. The baffle filters are designed to effectively capture grease and other particles, ensuring that the cooking area remains clean and safe from fire hazards.

Kobe's range hoods also stand out due to their versatile installation options, suitable for ducted or ductless configurations, depending on the kitchen's setup. This flexibility makes them an ideal choice for various kitchen layouts and personal preferences.

Overall, the Kobe Range Hoods RA0236SQB, RA0242SQB, RA0230SQB, and RA0248SQB models showcase a perfect blend of performance, style, and convenience. They are designed to cater to modern cooking needs while enhancing the overall kitchen experience, making them a worthy addition to any culinary space.
Top Page Image Contents