Kobe Range Hoods IN2730SF installation instructions Preparation Before Installation

Page 7

- For Insert installation -

Preparation Before Installation

Figure 1

NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING.

•Decide the location of the venting pipe from the hood to the outside. Refer to Figure 1.

•A straight, short vent run will allow the hood to perform more efficiently.

•Try to avoid as many transitions, elbows, and long run as possible. This may reduce the performance of the hood.

•Temporarily wire the hood to test for proper operation before installing.

•Important: Peel protective film off the hood, if any.

•Use duct tape to seal joints between pipe sections.

Figure 2

CAUTION: If moving the cooking range is necessary to install the hood, turn off the power in an electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE. And use a protective covering to protect cooktop and/or countertop from damage.

Custom Hood Preparation

1.The custom hood frame must be sized to shape and the weight of the insert. Refer to Measurements and Diagrams on Page 11.

2.It must have a sturdy base (1/2 inch thick plywood

recommended) to sustain the weight of insert.

Figure 3

3.If an optional liner will be installed, the side of the wood cabinet must be sturdy (1/2 inch thick plywood recommended).

4.It is recommended to install a rear and front stud support. Refer to Figure 2. The stud supports are located 1-1/2” up from the base of the wood frame.

Liner Installation

5.The custom/wood hood must have a sturdy base to accommodate the cut-out for the inset. The base must be recessed to accommodate the height of the liner (See liner dimension on Page 12)

6.Secure the liner to the bottom of the base using screws (not included) appropriate for the size and material of your wood frame.

7.Position the rear section of the liner so that it aligns with the back edge of the custom wood frame. Use a pen to trace the outline of the pre-cut area. Remove the liner and proceed to Hood Preparation Before Installation on Page 6.

8.Install the liner with 5 screws (not provided).

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Kobe Brand Range Hood Read and Save These Instructions ContentsTOP Grease Fire Important Safety InstructionsPage Components of Package For Under the Cabinet InstallationPreparation Before Installation Wiring to Power Supply Hood Installation Operating Instructions Change Filter Halogen Light Control Power Control IndicatorCleaning Hood Surface MaintenanceTo Replace Halogen Light Bulbs Specifications Measurements & Diagrams Stainless Steel Liner Sold Separately Model No. INL36211A Model no Parts ListOptional Liner Sold Separately Circuit Diagram Model NO. IN2730SF Claims will not be Accepted After the Allocated Days DisclaimerConditions WarrantyWarranty Certificate TWO-YEAR Warranty Service PeriodConsequential Damage ServiceImplied WARRANTIES/STATE LAW Record the Following Information for Your Record Product RegistrationVER.070521

IN2730SF specifications

The Kobe Range Hoods IN2730SF is a standout appliance designed for modern kitchens, offering a blend of advanced technology, sleek aesthetics, and unmatched performance. Known for their commitment to quality and innovation, Kobe has created this model to meet the demands of both professional chefs and home cooking enthusiasts alike.

One of the key features of the IN2730SF is its powerful 900 CFM blower. This high-performance blower ensures exceptional ventilation, efficiently eliminating smoke, odors, and grease from your kitchen. Whether you're simmering sauces or searing meats, this range hood is equipped to handle thick, greasy air, keeping your kitchen fresh and clean. The adjustable speed settings allow users to customize airflow based on cooking needs, further enhancing its versatility.

The design of the IN2730SF embodies sophistication and style, featuring a stainless steel finish that complements a wide range of kitchen decors. Its sleek under-cabinet design saves space while providing a stunning focal point. Additionally, the 30-inch width fits standard cooktops perfectly, making it a practical choice for any kitchen layout.

Another standout characteristic is the unit's noise reduction technology. Kobe incorporates a unique “quiet mode” that minimizes operational sound, allowing for a more pleasant cooking experience. Even at high speeds, the unit operates at competitive noise levels, ensuring that conversations can continue unhindered in the kitchen.

The IN2730SF is also designed for ease of use and maintenance. The baffle filters are dishwasher safe, making cleaning effortless and minimizing upkeep. Moreover, the range hood features LED lighting, providing bright illumination over your cooking area while being energy efficient.

In terms of technological advancements, the IN2730SF includes a convenient remote control, allowing you to adjust speed and lighting settings without having to reach for the hood directly. The intuitive controls add to the user-friendly experience, catering to both seasoned cooks and those who are new to the kitchen.

Overall, the Kobe Range Hoods IN2730SF is an investment in quality and performance. Its combination of powerful ventilation, stylish design, and innovative technology makes it a must-have appliance for any kitchen, elevating both functionality and aesthetics. Whether you’re entertaining guests or enjoying a quiet meal at home, this range hood enhances the cooking experience while ensuring a fresh and pleasant environment.
Top Page Image Contents