KitchenAid 8301169 installation instructions Parts supplied for installation, Product dimensions

Parts supplied for installation

1-3/4"

(4.4 cm)

1"

(2.5 cm)

2 - #10 x 2"	anti-tip
phillips head screws	brackets

• Anti-tip bracket must be securely

attached to a wall stud. Thickness of

finished wall may require using

longer screws to anchor the bracket.

• L.P. conversion kit is included in

literature package.

• Backguard and island trim. The

backguard included with the range

must be installed when a standard

24" (61 cm) deep base cabinet is

used and there is zero clearance

between the back edge of range

and combustible rear wall.

For island installations or other

installations with more than 5"

NOTE: regulator

located at center

bottom of range.36" (91.4 cm) cooktop width

9-1/4"

(23.5 cm)

1/4" (6.4 mm) spacer

26-1/2" (67.3 cm)

width with

control panel

Product dimensions

45" (114.3 cm) overall height

36" (91.4 cm) cooktop height with feet loosened 3/4 turns

36" (91.4 cm)

width

36" (91.4 cm) range with all sealed burners shown

(12.7 cm) clearance to back wall,

use the optional stainless steel

island trim, included with the range,

to cover the backguard mounting

flanges.

Cabinet opening dimensions

13" (33 cm) max.

upper cabinet depth 36" (91.4 cm) min. upper cabinet width

For minimum clearance to top of range, see NOTE.*

18" (45.7 cm) upper cabinet to countertop

*NOTE: 42" (106.7 cm) min. when bottom of wood or metal cabinet is protected by not less than 1/4" (6.4 mm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.

48" (121.9 cm) min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.

3-1/2" (8.9 cm) maximum junction

box height

junction box to be located in this area

36-1/4" (92.1 cm)

opening width

28"

(71.1 cm)

4" (10.2 cm)

20"

(50.8 cm)

			4" (10.2 cm) min.
			clearance from both sides
			of range to side wall or
			other combustible material
			above cooking surface
			0" (0 cm) clearance from
			both sides and back of
			range to adjacent
8"			combustible construction
			below cooking surface
(20.3 cm)
	3" (7.6 cm) maximum
		gas line height

gas line opening to be

located in this area

5-1/2" (14 cm)

12"

(30.5 cm)

3