Sunfire 12 user manual Contents

Page 3

15.To Prevent Electric Shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

Pour préevenir les chocs électriques ne pas utiliser cette Þche polariseé avec un prolongateur, un prise de courant ou une autre sortie de courant, sauf si les lames peuvent être insérées à fond sans laisser aucune pariie à découvert.

16.Grounding or Polarization — Precau- tions should be taken so that the ground- ing or polarization means of the Com- ponent is not defeated.

This apparatus does not exceed the Class A/Class B (whichever is applicable) limits for radio noise emissions from digital ap- paratus as set out in the radio interference regulations of the Canadian Department of Communications.

ATTENTION — Le présent appareil numéri- que n'émet pas de bruits radioélectriques dépassant las limites applicables aux ap- pareils numériques de class A/de class B (selon le cas) prescrites dans le règlement sur le brouillage radioélectrique édicté par les ministere des communications du Canada.

WARNING:THIS SUBWOOFER IS CAPABLE OF PRODUCING VERY HIGH SOUND PRESSURE LEVELS. YOU MUST TAKE EVERY PRECAUTION TO PROTECT YOUR HEARING FROM PERMANENT DAMAGE.

Contents

Safety Instructions

2

Introduction

4

Features

4

Unpacking and Care

4

Overview

5

Control Panel Features

6

Installation

9

Connections

10

Location

11

Room Equalization Procedure

12

System ConÞgurations

14

Adjusting the Controls

18

SpeciÞcations (Solitaire 12)

19

SpeciÞcations (Solitaire 10)

20

Troubleshooting Guide

21

Limited Warranty

23

Service Assistance

23

To Þnd out more about this and other SunÞre products,

please visit our website: www.sunÞre.com

User's Manual

 

3

 

Image 3
Contents True Subwoofer Water and Moisture The Compo Safety InstructionsContents Care FeaturesIntroduction UnpackingOverview DriverAmpliÞer Control Panel Features Line Fuse Line Level InputsBalanced XLR Input Speaker Level InputsMicrophone Input Control Panel FeaturesPower Switch Start buttonMagnetic Fields InstallationAC Power Considerations Heat riseSpeaker Level connections ConnectionsLocation Using Two SubwoofersAutomatic EQ Mode Room Equalization EQ ProcedureResetting the EQ Manual EQ ModeConnections to a preampliÞer’s subwoofer output System ConÞgurationsConnections to a preampliÞer using Y cables Using the line level high-pass outputs Using the speaker level inputs Control settings Adjusting the controlsSpeciÞcations Solitaire Input Sensitivity full output Driver 10 inchTroubleshooting Not enough bassNot enough bass in a 5.1 system Hum Subwoofer won’t turn offSubwoofer won’t turn on automatically Service Assistance Limited WarrantySolitaire

12 specifications

The Sunfire 12 is a state-of-the-art subwoofer designed to deliver unparalleled audio performance for both music lovers and home theater enthusiasts. Known for its deep, powerful bass response, the Sunfire 12 has become a popular choice among audio engineers and consumers alike. This subwoofer embodies a blend of innovative technology and practical design, making it a standout option in the competitive subwoofer market.

One of the hallmark features of the Sunfire 12 is its impressive 12-inch high-excursion driver. This driver is engineered to move more air than typical subwoofers, resulting in profound low-frequency output. The driver is complemented by a unique Dual Voice Coil design, which allows for greater control and improved linearity during operation, ensuring that dynamic audio passages are reproduced with precision.

The subwoofer also incorporates Sunfire’s patented "Tracking Downconverter" technology. This advanced power supply design ensures that the Sunfire 12 can deliver consistent power output, even during the most demanding audio peaks. The result is a dramatic increase in efficiency, which translates to powerful bass without distortion, even at high volumes.

Another notable characteristic of the Sunfire 12 is its compact size. While it delivers deep, resonant bass, the subwoofer's enclosure is significantly smaller than traditional models. This compact design allows for flexible placement in a variety of home environments, making it an ideal choice for those with limited space. The elegant aesthetic of the enclosure ensures that it can blend seamlessly into any room décor.

The Sunfire 12 also features a sophisticated set of adjustable controls. These allow users to fine-tune the subwoofer’s performance to match the acoustics of their space, ensuring optimal sound quality regardless of the room’s dimensions. The built-in crossover and phase control further enhance the ability to integrate the subwoofer with existing sound systems, allowing for a customized listening experience.

With its robust construction and cutting-edge technologies, the Sunfire 12 sets a high standard for compact subwoofers. Whether for music playback or home theater applications, the Sunfire 12 delivers an immersive audio experience, making it a top choice for discerning audiophiles seeking powerful bass without compromise.