Sunfire 12 user manual Control Panel Features

Page 6

Control Panel Features

15

14

13

12

11

10

9

DIM - STANDBY

BRIGHT - ON

Solitaire 10

1

2

3

4

5

6

7

8

1. Volume

This control lets you match the output level of the subwoofer to the level

of your satellite/main speakers. The subwoofer output will increase as this control is rotated clockwise. When you have just installed your system, turn this down Þrst before turning on your subwoofer. This will prevent any loud surprises.

2. Crossover Frequency

This controls the high frequency cutoff point. With the control set to the 100 Hz mark, the subwoofer will reproduce frequencies up to 100 Hz. If the control is set fully clockwise, the crossover is bypassed and the subwoofer will re- produce a wide frequency range. With the control fully counter-clockwise the subwoofer reproduces a narrow range, up to 30 Hz.

Rotate the control until the bass sounds natural. If the mid-bass sounds natural but you want more low bass, turn this control down a little, then turn the Volume control up by about the same amount. This increases the low-bass output while leaving the mid-bass output the same.

3. Phase Control

This control changes the relative phase of the subwoofer with respect to your other speakers. Use this control to help blend the subwoofer with the rest of your system. This is accomplished by adjusting the control in small incre- ments as you listen for the most bass at your listening position. As a Þnal trim, readjust the Crossover Frequency and Volume controls after the Phase has been set.

4. Trigger Inputs

These two inputs can be used to auto- matically turn on the subwoofer. To do this, connect 12 VDC to either of these terminals. Some Home Theater pre- ampliÞers, such as the SunÞre Theater Grand series, have matching 12 VDC Trigger outputs. When they are turned on, the subwoofer will turn on.

5. Outputs

Line level high-pass output signals are available at these jacks. These outputs are active whenever a signal is hooked up to the line level inputs of the subwoofer. This crossover is a

6

 

User's Manual

 

Page 5 Page 7
Image 6
Page 5 Page 7
Contents True Subwoofer Safety Instructions Water and Moisture The CompoContents Unpacking FeaturesIntroduction CareOverview DriverAmpliÞer Control Panel Features Speaker Level Inputs Line Level InputsBalanced XLR Input Line FuseStart button Control Panel FeaturesPower Switch Microphone InputHeat rise InstallationAC Power Considerations Magnetic FieldsConnections Speaker Level connectionsUsing Two Subwoofers LocationRoom Equalization EQ Procedure Automatic EQ ModeManual EQ Mode Resetting the EQSystem ConÞgurations Connections to a preampliÞer’s subwoofer outputConnections to a preampliÞer using Y cables Using the line level high-pass outputs Using the speaker level inputs Adjusting the controls Control settingsSpeciÞcations Solitaire Driver 10 inch Input Sensitivity full outputTroubleshooting Not enough bassNot enough bass in a 5.1 system Hum Subwoofer won’t turn offSubwoofer won’t turn on automatically Limited Warranty Service AssistanceSolitaire

12 specifications

The Sunfire 12 is a state-of-the-art subwoofer designed to deliver unparalleled audio performance for both music lovers and home theater enthusiasts. Known for its deep, powerful bass response, the Sunfire 12 has become a popular choice among audio engineers and consumers alike. This subwoofer embodies a blend of innovative technology and practical design, making it a standout option in the competitive subwoofer market.

One of the hallmark features of the Sunfire 12 is its impressive 12-inch high-excursion driver. This driver is engineered to move more air than typical subwoofers, resulting in profound low-frequency output. The driver is complemented by a unique Dual Voice Coil design, which allows for greater control and improved linearity during operation, ensuring that dynamic audio passages are reproduced with precision.

The subwoofer also incorporates Sunfire’s patented "Tracking Downconverter" technology. This advanced power supply design ensures that the Sunfire 12 can deliver consistent power output, even during the most demanding audio peaks. The result is a dramatic increase in efficiency, which translates to powerful bass without distortion, even at high volumes.

Another notable characteristic of the Sunfire 12 is its compact size. While it delivers deep, resonant bass, the subwoofer's enclosure is significantly smaller than traditional models. This compact design allows for flexible placement in a variety of home environments, making it an ideal choice for those with limited space. The elegant aesthetic of the enclosure ensures that it can blend seamlessly into any room décor.

The Sunfire 12 also features a sophisticated set of adjustable controls. These allow users to fine-tune the subwoofer’s performance to match the acoustics of their space, ensuring optimal sound quality regardless of the room’s dimensions. The built-in crossover and phase control further enhance the ability to integrate the subwoofer with existing sound systems, allowing for a customized listening experience.

With its robust construction and cutting-edge technologies, the Sunfire 12 sets a high standard for compact subwoofers. Whether for music playback or home theater applications, the Sunfire 12 delivers an immersive audio experience, making it a top choice for discerning audiophiles seeking powerful bass without compromise.
Top Page Image Contents