Kobe Range Hoods IN2636SQB manual Wiring to Power Supply

Page 8

the back edge of the custom wood frame. Use a pen to

trace the outline of the pre-cut area. Remove the liner Figure 4 and proceed to Hood Preparation Before Installation.

9.Install the rear section of the liner with 6 screws (not included).

10.Install the front section of the liner with 3 screws (not included)

11.Proceed to Hood Installation on Page 7.

Wiring to Power Supply

SAFETY WARNING

RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED. MAKE SURE THIS IS DONE BY QUALIFIED ELECTRICIAN IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER Figure 5

OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY.

12.Temporarily wire the hood to test for proper operation before installing. If the insert does not operate, check the circuit breaker or house fuse. If the insert is still not working, disconnect the power supply and check the continuity of all wiring connections.

13.Connect electrical wires.

14.Connect three wires (black, white and green) to house wires and cap with wire connectors. Connect wires according to their colors (i.e. black to black, white to Figure 6 white, and green to green). See Figure 3.

15.Store wires in the wiring box.

Note: Connect all electrical wires before installing insert. DO NOT turn on the power until installation is complete.

Duct Work Installation

16.Use 7” steel pipe (follow building codes in your area) to connect the ducting on the hood to the ductwork above. Use duct tape to seal and secure joints as shown in Figure 4.

17.Please refer to local codes for the usage of the damper (not included).

Figure 7

Hood Preparation Before Installation

CAUTION: If moving the cooking range is necessary to install the hood, turn off the power in an electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE.

18.Determine and mark the centerlines on the base of the wood frame where the insert will be installed.

19.Determine and make all necessary cuts in the wall or ceiling for the ductwork. Note: Install the ductwork

6

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Kobe Brand Range Hood Contents Read and Save These InstructionsImportant Safety Instructions TOP Grease FirePage Components of Package Liner Sold SeparatelyInstallation For Under the CabinetPreparation Before Installation Wiring to Power Supply Hood Installation Final Assembly Operating Instructions Page Page Maintenance USE Paper Towel on Stainless SteelSpecifications Optional AccessoriesMeasurements & Diagrams Stainless Steel Liner Sold Separately Model No. INL36252A Parts List Model no IN2636SQBOptional Liner Sold Separately Circuit Diagram Model NO. IN2636SQB Disclaimer Claims will not be Accepted After the Allocated DaysWarranty Warranty CertificateTWO-YEAR Warranty Service Period ConditionsImplied WARRANTIES/STATE LAW ServiceConsequential Damage Product Registration Record the Following Information for Your RecordVER.070718

IN2636SQB specifications

The Kobe Range Hoods IN2636SQB is a premium kitchen appliance designed to elevate the cooking experience while ensuring a clean and healthy environment. This range hood is known for its powerful performance, sleek design, and advanced technology that caters to the needs of both amateur cooks and professional chefs.

One of the standout features of the IN2636SQB is its impressive suction power. With a maximum airflow capacity of 600 CFM (cubic feet per minute), it effectively removes smoke, odors, and grease from the air, keeping your kitchen fresh and clean. This high level of performance is particularly beneficial for those who love to cook with high heat or use multiple burners simultaneously.

The noise level of a range hood is crucial for many home chefs, and the Kobe IN2636SQB excels in this area as well. It operates at a quiet level of 1.5 sones on its low setting, ensuring that conversations and entertainment can continue uninterrupted while the hood works efficiently. This feature makes it ideal for open-concept kitchens where the range hood is not only a functional tool but also a part of the living space.

In terms of design, the IN2636SQB boasts a stylish and modern aesthetic. Its sleek stainless steel finish complements a variety of kitchen styles, from contemporary to traditional. The range hood is designed to be wall-mounted, saving valuable counter space and providing an unobtrusive appearance.

One of the remarkable technologies incorporated into the IN2636SQB is its easy-to-use control panel. The hood features a three-speed fan, allowing users to adjust the suction power according to their cooking needs. Additionally, the integrated energy-efficient LED lighting illuminates the cooking surface, providing optimal visibility while consuming minimal energy.

Maintenance is made simple with the removable and dishwasher-safe baffle filters, which efficiently capture grease and other particles. This ease of cleaning ensures that the range hood maintains its performance and appearance over time.

Overall, the Kobe Range Hoods IN2636SQB combines powerful performance, quiet operation, and stylish design, making it an excellent addition to any kitchen. Whether you are a casual cook or a culinary enthusiast, this range hood is engineered to meet your cooking needs while enhancing the overall kitchen environment.
Top Page Image Contents