Kobe Range Hoods IN2636SQB manual Preparation Before Installation

Page 7

- For Insert installation -

Preparation Before Installation

Figure 1

NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING.

•Decide the location of the venting pipe from the hood to the outside. Refer to Figure 1.

•A straight, short vent run will allow the hood to perform more efficiently.

•Try to avoid as many transitions, elbows, and long run as possible. This may reduce the performance of the hood.

•Temporarily wire the hood to test for proper operation before installing.

•Important: Peel protective film off the hood, if any.

•Use duct tape to seal joints between pipe sections.

CAUTION: If moving the cooking range is Figure 2 necessary to install the hood, turn off the power in an

electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE. And use a protective covering to protect cooktop and/or countertop from damage.

Custom Hood Preparation

1.The custom hood frame must be sized to the shape and weight of the insert. Refer to Measurements and Diagrams on Page 13.

2.It must have a sturdy base (3/4 inch thick plywood recommended) to sustain the weight of insert.

3.If an optional liner will be installed, the side of the wood Figure 3 frame must be sturdy (3/4 inch thick plywood

recommended).

4.It is recommended to install rear & front stud support

(not included). Refer to Figure 2. The rear and front stud support is located 1-1/2” up from the base of the wood frame. For safety purposes, extra installation holes on the side of the insert are provided. Prepare the side stud support if needed.

Liner Installation

5.The custom wood frame must have a sturdy base to accommodate the cut-out for the inset. The base must be recessed to accommodate the height of the liner (See liner dimension on Page 14)

6.Secure the liner to the bottom of the base using screws (not included) appropriate for the size and material of your wood frame.

7.Liner is made up of two sections: a large, rear section with pre-cut for insert and a front section for a total adjustable depth between 23” and 25-3/4”.

8.Position the rear section of the liner so that it aligns with

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Kobe Brand Range Hood Read and Save These Instructions ContentsTOP Grease Fire Important Safety InstructionsPage Liner Sold Separately Components of PackageFor Under the Cabinet InstallationPreparation Before Installation Wiring to Power Supply Hood Installation Final Assembly Operating Instructions Page Page USE Paper Towel on Stainless Steel MaintenanceOptional Accessories SpecificationsMeasurements & Diagrams Stainless Steel Liner Sold Separately Model No. INL36252A Model no IN2636SQB Parts ListOptional Liner Sold Separately Circuit Diagram Model NO. IN2636SQB Claims will not be Accepted After the Allocated Days DisclaimerConditions WarrantyWarranty Certificate TWO-YEAR Warranty Service PeriodConsequential Damage ServiceImplied WARRANTIES/STATE LAW Record the Following Information for Your Record Product RegistrationVER.070718

IN2636SQB specifications

The Kobe Range Hoods IN2636SQB is a premium kitchen appliance designed to elevate the cooking experience while ensuring a clean and healthy environment. This range hood is known for its powerful performance, sleek design, and advanced technology that caters to the needs of both amateur cooks and professional chefs.

One of the standout features of the IN2636SQB is its impressive suction power. With a maximum airflow capacity of 600 CFM (cubic feet per minute), it effectively removes smoke, odors, and grease from the air, keeping your kitchen fresh and clean. This high level of performance is particularly beneficial for those who love to cook with high heat or use multiple burners simultaneously.

The noise level of a range hood is crucial for many home chefs, and the Kobe IN2636SQB excels in this area as well. It operates at a quiet level of 1.5 sones on its low setting, ensuring that conversations and entertainment can continue uninterrupted while the hood works efficiently. This feature makes it ideal for open-concept kitchens where the range hood is not only a functional tool but also a part of the living space.

In terms of design, the IN2636SQB boasts a stylish and modern aesthetic. Its sleek stainless steel finish complements a variety of kitchen styles, from contemporary to traditional. The range hood is designed to be wall-mounted, saving valuable counter space and providing an unobtrusive appearance.

One of the remarkable technologies incorporated into the IN2636SQB is its easy-to-use control panel. The hood features a three-speed fan, allowing users to adjust the suction power according to their cooking needs. Additionally, the integrated energy-efficient LED lighting illuminates the cooking surface, providing optimal visibility while consuming minimal energy.

Maintenance is made simple with the removable and dishwasher-safe baffle filters, which efficiently capture grease and other particles. This ease of cleaning ensures that the range hood maintains its performance and appearance over time.

Overall, the Kobe Range Hoods IN2636SQB combines powerful performance, quiet operation, and stylish design, making it an excellent addition to any kitchen. Whether you are a casual cook or a culinary enthusiast, this range hood is engineered to meet your cooking needs while enhancing the overall kitchen environment.
Top Page Image Contents