Kenyon B81200 Series manual Install the Hood, Electrical Grounding Instructions

Page 5

Installation

Cabinet

Side Spring

Figure 6

Side Spring

 

Cabinet

Door

Install the Hood

Set the motor housing into the opening.

Push the spring inside the motor housing using a screw driver as a lever from the inside of the motor housing.

Insert it completely in place taking care to snap sides springs into the blind holes made for temporary fixing and that conduit and duct section, if already fitted, run freely across the cut- outs on top of the cabinet, see figure 6.

Fix the hood permanently with two screws (4.5x16) per side tobeinsertedfrometheinsideofthehoodtothecorresponding side fixing points 1 and 2 drilled on the cabinet, see figure 7.

Connect a 5” duct to the transition and seal with tape.

Connect to power supply

Attention! While mounting the hood on the wall cabinet be sure once the hood has been fastened, that the wiring compartment is easily and safely accessible, in order to make safety inspections and/or maintenance operations.

WARNING!

ELECTRICAL GROUNDING INSTRUCTIONS

THIS APPLIANCE IS FITTED WITH AN ELECTRICAL JUNCTION BOX WITH 3 WIRES, ONE OF WHICH (GREEN/YELLOW) SERVES TO GROUND THE APPLIANCE. TO PROTECT YOU AGAINST ELECTRIC SHOCK, THE GREEN/YELLOW WIRE MUST BE CONNECTED TO THE GROUNDING WIRE IN YOUR HOME ELECTRICAL SYSTEM, AND IT MUST UNDER NO CIRCUMSTANCES BE CUT OR REMOVED.

Warning: Turn off power circuit at the service panel before wiring this unit.

120 VAC, 15 or 20 Amp circuit required.

a. Remove j-box cover as shown in Figure 8.

Fixing point 1-2

Template

 

cutout for

 

1/2" Conduit

 

and 5" Duct

 

Backside

 

border

Backside of

Blind hole

the cabinet

(Side Springs

Figure 7

Housing)

 

Fixing point 1-2

Template

Bottom of

the cabinet

b.Remove the knockout and install the strain relief (conduit) connector (1/2") in junction box.

c.Run 3 wires; black, white and green (#16 AWG) in 1/2" conduit from service panel to junction box.

d.Connect black wire from service panel to black or red in junction box, white to white and green to green-yellow. See Figure 8.

e. Close junction box cover.

Conduit

Figure 8

5

Image 5
Contents OWNER’S Guide Important Safety Instructions Basic Installation Steps InstallationDimensions Before Installing Hood Prepare the hood for installation Prepare the cabinet for installationElectrical Grounding Instructions Install the HoodBox adjustment Final installation stepsOperating Instructions Use and Care Control Pad FunctionsTo Remove The Metal Grease Filters To Clean FiltersTo Clean Hood Surface Page Page Page LI1QVB Ed /02

B81200 Series specifications

The Kenyon B81200 Series represents a significant advancement in portable electric cooking technology, catering to the needs of modern culinary enthusiasts. This series of cooktops stands out for its innovative design, high efficiency, and user-friendly features, making it a popular choice for both home cooks and professional chefs.

One of the main features of the Kenyon B81200 Series is its sleek, elegant design that seamlessly blends with any kitchen décor. The ceramic glass surface not only enhances its aesthetic appeal but also provides a smooth cooking area that is easy to clean. The series is available in various sizes, allowing users to select a model that fits their specific cooking space requirements.

Technologically, the Kenyon B81200 incorporates high-quality induction cooking technology, which ensures fast and efficient heating. This method allows for rapid temperature adjustments and precise control, resulting in better cooking outcomes. With induction cooking, energy is directly transferred to the cookware, minimizing heat loss and leading to a more eco-friendly cooking process.

The B81200 Series also features multiple cooking zones, each equipped with individual controls. This allows users to cook multiple dishes simultaneously with precision. The intuitive control panel is easy to navigate, with clear indicators of temperature settings and cooking times. Moreover, the series is designed with safety in mind; it includes features like automatic shut-off, overheat protection, and child lock functions, ensuring a safe cooking environment.

Another notable characteristic of the Kenyon B81200 Series is its versatility. It supports a wide range of cookware types, including stainless steel, cast iron, and some non-ferrous materials. This flexibility makes it suitable for various cooking styles, from simmering sauces to searing meats.

Additionally, the series is compact and portable, making it ideal for small kitchens, RVs, and outdoor cooking. Its lightweight design does not compromise durability, as it is constructed from high-quality materials built to withstand everyday use.

In summary, the Kenyon B81200 Series is a remarkable blend of style, safety, and functionality. With its induction technology, multiple cooking zones, and user-friendly features, it meets the demands of today's culinary landscape while promoting energy efficiency and ease of use. Whether for casual home cooking or gourmet meal preparation, this series is poised to elevate any cooking experience.