- PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION -
WARNING TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, OBSERVE THE FOLLOWING:
1)Installation work and electrical wiring must be done by qualified profe accordance with all applicable codes and standards, including
2)When cutting or drilling into wall or ceiling, be careful not to damage e other hidden utilities.
3)Ducted fans must always be vented to the outside.
a)Before servicing or cleaning unit, open the light panel and SWITCH POWER SERVICE PANEL.
b)Clean fan, optional filter and grease laden surfaces frequently. To red and to disperse air properly, make sure to vent air outside. DO NOT ve into wall spaces, attics, crawl spaces or garages.
NOTE | - | This warranty is invalid without an authorized agent |
|
| receipt or unit is damaged due to misuse, poor |
|
| installation, improper use, mistreatment, negligence o |
|
| any other circumstances beyond the control of KOBE |
|
| RANGE HOODS authorized agents. Any repair carried |
|
| out without the supervision of KOBE RANGE HOODS |
|
| authorized agents will automatically void the warranty. |
| - | KOBE RANGE HOODS will not hold responsible for |
|
| any damages to personal property or real estate or any |
|
| bodily injuries, whether caused directly or indirectly |
|
| the range hood. |
CAUTION FOR GENERAL VENTILATION USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS. TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK. SUFFICIENT AIR IS NEEDED FOR PROPER COMBUSTION AND EXHAUSTING OF GASES THROUGH THE FLUE (CHIMNEY) OF FUEL BURNING EQUIPMENT TO PREVENT BACK DRAFTING. FOLLOW THE BEATING EQUIPMENT MANUFACTURERS GUIDELINE AND SAFETY STANDARDS SUCH AS THOSE PUBLISHED BY THE NATIONAL FIRE PROTECTION ASSOCIATION (NFPA), AND THE AMERICAN SOCIETY FOR HEATING, REFRIGERATION AND AIR CONDITIONING ENGINEERS (ASHRAE), AND CODE AUTHORITIES.
1