b)For rear venting: Unscrew the rectangular plastic vent portion at the {Fig.4} Turn the vent piece over so that the flat surface is facing yo indented outline until there… X is10aopening3. Fasten plastic vent piece with raised surface facing outward back onto the hood.
{Fig.4}{Fig.5
( Rear Venting )
5)Remove bottom panel & carefully place aside.
6)Take the hood, place electrical power line through access opening {Fig. 1b}, wood screws for mounting the hood. {Fig.1e}. CAUTION: MAKE SURE THE HOOD I SECURE BEFORE RELEASING.
7)Replace bottom casing.
8)Slide each oval oil container into the oil container slots at the back o {Fig.5}
9)Finally, place a round oil container with the three prongs into the larger made openings in the center of the screen & turn clockwise until it snaps in same for the other round oil container. {Fig.6}
For Mounting on a Cabinet with a Recessed Bottom
1)If you need to move the cooking range to work on the cabinet, turn off t electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A RANGE.
2)Measure the space (under the cabinet) between the inside front edge and i {Fig. 3}. With a saber saw, cut wood filler strips (not included) to fill cabinet. Use
{Fig. 3}
6