EB-1 Electrical Box

LDVT Series Direct Vent Gas Fireplace

The ﬁreplace, when installed, must be elec- trically connected and grounded in accord- ance with local codes or, in the absence of local codes, with the current CSA C22.1 Canadian Electrical Code.

For USA installations follow local codes and the national electrical code ANSI/ NFPA No. 70.

It is strongly suggested that the wiring of the EB-1 Electrical Junction Box be carried out by a licensed electrician.

Ensure that the power to the supply line has been disconnected before commenc- ing this procedure.

The EB-1 Electrical junction box has been ﬁtted stand- ard on this model to allow for the easy connection of an optional fan kit.

To connect the EB-1 box to the house electrical supply follow the steps below.

1.Unscrew retaining screw from EB-1 base plate (Fig. 8) and remove the EB-1 assembly from the appli- ance.

2.Remove the front cover of the EB box.

3.Remove the plug socket assembly from the EB-1 box.

4.Feed the supply line in through the EB-1 opening in the side of the appliance and then through the back of the EB-1 assembly. (Fig. 8)

5.Connect the black wire of the power supply line to the brass screw (polarized) of the socket assembly.

6.Connect the white wire of the power line to the chrome screw of the socket assembly.

7.Connect the ground wire of the supply line to the green screw of the socket assembly.

8.Reﬁt the socket assembly back into the electrical box and replace the cover plate. Secure the cable with the clamp on the outside of the EB-1 base plate and reﬁt the EB-1 assembly to the unit with the screw removed in step 1.

INSIDE	Electrical Box
	Electrical Box
	Retaining Screw
��
OUTSIDE

BACK	OF	UNIT
	OF

		FP580

Fig. 8 EB-1 receptacle.

Electronic Gas Control Valve

This appliance may be ﬁtted with a Synetek ignition module.

Installation of the remote on/off switch or wall ther- mostat on electronic ignition units.

1.Thread the wiring through the holes on the side panels of the appliance. Take care not to cut the wire or insulation on metal edges. Route the wire to a conveniently located receptacle box.

2.Attach the wire to the ON/OFF switch and install the switch into the receptacle box.

3.Connect the white wire from the wall switch or wall thermostat to the white wire terminal from the elec- tronic module. Connect the black wire from the wall switch or the red wire from the wall thermostat, to

the red wire terminal from the electronic module.

10007852

3LDVT, 36LDVT 39LDVT, 43LDVT specifications

Vermont Casting has been a standout name in the world of cast-iron wood and gas stoves, delivering exceptional craftsmanship and innovative technology. The models 36LDVT, 39LDVT, 43LDVT, and 3LDVT are no exception. These stoves are designed to blend functionality with timeless aesthetics, making them perfect for a range of home settings.

The 36LDVT, featuring a compact design, is ideal for smaller spaces without sacrificing performance. Its advanced airflow technology ensures a clean burn, increasing efficiency and reducing emissions. The unique front-loading door allows for easy access to firewood, while the large viewing window creates an inviting ambiance, showcasing the flames beautifully.

The 39LDVT offers a larger firebox, accommodating bigger logs, making it suitable for those who enjoy longer burn times. Like the 36LDVT, it incorporates Vermont Casting's patented airflow system, optimizing heat output. One of its standout features is the innovative Intelli-Burn technology, which automatically adjusts the air intake for consistent heating. This ensures that the user spends less time managing fuel and more time enjoying the warmth.

For homeowners with more extensive heating needs, the 43LDVT provides ample heating capacity. Its robust construction not only enhances durability but also maximizes heat retention. The stove is designed with a user-friendly interface that simplifies operation. It also comes with adjustable legs, allowing for customizable installation to fit specific preferences and aesthetics.

Finally, the 3LDVT model is an epitome of efficiency, designed with modern technology while paying homage to classic wood-burning aesthetics. Its clean-line design effortlessly fits into contemporary and traditional spaces alike. The 3LDVT utilizes a secondary combustion chamber, promoting an even cleaner burn and increasing heat output. With easy-to-use controls and a reliable ignition system, users can ignite warmth at the push of a button.

Each of these Vermont Casting stoves emphasizes reliability, efficiency, and environmental friendliness. They are not just heating appliances; they represent a commitment to sustainable living without compromising on style or comfort. The blend of innovative technologies, including adjustable airflow and secondary combustion systems, positions these models as top choices for anyone looking to enhance their home heating experience with elegance and efficiency.