Stovax 1002, 1001, 1000 manual Commissioning, Give the copy of the Instructions to the customer

Page 21

COMMISSIONING

COMMISSIONING

1.1To commission:

•Replace the firebricks, baffle, and log retainer

•Check the door alignment and catch operation

•Check the soundness of door seals, castings and joints

•Check the operation of the air controls

1.2Now carry out a final smoke draw test:

•First warm the flue with a blowlamp, or similar, for about

10 minutes

•Place a smoke pellet on the centre of the grate, with the air controls open

•Close the door

Smoke should now be drawn up the flue and be seen to exit from the flue terminal

•Complete test with all doors and windows closed in the room where the appliance is fitted

•If there are any extractor fans in adjacent rooms, the test must be repeated with the fans running on maximum and interconnecting doors open

•Check the effect of ceiling fans during the test

If the test fails, re-check the suitability of the flue system and ventilation. An inadequate air supply to the room is potentially dangerous.

•Light the appliance and slowly increase the temperature to operating levels

•Ensure no combustion products enter the room

•Open the main fire door when the appliance reaches operating condition and carry out a spillage test with a smoke match or pellet around the door opening

1.3If excessive spillage occurs:

•Allow the appliance to cool and re-check the flue system and ventilation

1.4Finally:

•Explain the safe operation of the appliance and the use of the controls to the user and the importance of only using suitable fuels

•Explain the cleaning and routine maintenance requirements

•Explain the requirement to use a suitable fireguard

when children, elderly or infirm persons are near the appliance

•Record dealer/supplier details and installer details in Instructions

•Record serial number in page 3 of Instructions

This number is required when ordering spare parts and making warranty claims

•Give the copy of the Instructions to the customer

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Models 1000/1001/1002 RegencyPRE-INSTALLATION Installation InstructionsInstallation Commissioning Maintenance & ServicingInstallation Engineer Appliance Commissioning ChecklistStovax dealer appliance was purchased from Essential Information Must be completedUser Instructions Use a protective gloved hand to operate. See DiagramGeneral Points Serial NumberBottom view Recommended Fuels Using the Appliance for the First TimeDo not touch the paint during the first period of use Wood LogsLighting The appliance Running The applianceBurning tips ASH Removal Extended burning General CleaningOVER-FIRING Chimney fireCare of appliance Troubleshooting tipsSeasonal use Product Code DescriptionTECHNICAL SPECIFICATION Standard FeaturesModel Description Model Regency DimensionsFlue or Chimney Site RequirementsMax. Draught = 2.0mm Wg Min. Draught = 1.0mm Wg U.K Flue PlateFlue Outlet Positions Hearth DimensionsDistance of Appliance to wall Walls Next to a HearthVentilation PRE-INSTALLATION ChecksAdditional Ventilation Installing the Appliance Installation InstructionsTop flue pipe installation Legal requirementsRear flue pipe installation Fitting and Removal of BaffleDo not use a 90˚ elbow to make this connection Optional Additions Fitting and Removal of the GrateCommissioning CommissioningGive the copy of the Instructions to the customer Fitting and Removal of Baffle Grate Annual ServiceRegency small Basic Spare Parts ListRegency medium RegencY Large Description Casting No10TH Service Service RecordsEZ/07/1991/09-10

1000, 1001, 1002 specifications

The Stovax 1000, 1001, and 1002 models are a range of modern and efficient wood-burning stoves designed to enhance both aesthetic appeal and functionality in any home. Known for their sleek lines and contemporary designs, these stoves not only serve as a reliable source of heat but also as a stunning focal point in living spaces.

One of the main features of the Stovax 1000 series is their exceptional efficiency. Each model is engineered to provide an impressive heat output while consuming minimal fuel, making them an eco-friendly choice for heating. These stoves are built to comply with stringent environmental regulations, ensuring cleaner combustion and reduced emissions.

The Stovax 1000, 1001, and 1002 models are equipped with advanced air wash technology, which keeps the glass door clean and clear, allowing for an unobstructed view of the beautiful flames. This feature not only enhances the visual experience but also makes maintenance easier for users. The stoves incorporate a multi-fuel capability, allowing owners to utilize both wood and smokeless fuels, offering flexibility based on availability and preference.

In terms of design, these models boast a contemporary aesthetic with a variety of finish options, including classic black and a range of colors to suit different interior decors. The sleek body and smooth lines contribute to a modern look that fits well in various environments, from rustic cabins to urban apartments.

The Stovax 1000 series also places a strong emphasis on craftsmanship and durability. Constructed from high-quality materials, these stoves are designed to last, providing years of dependable service. The robust built-in components ensure reliable performance under continuous use.

Another notable characteristic is the user-friendly controls, allowing homeowners to easily adjust the airflow for optimal burning conditions. This technology promotes a longer burn time and better fuel efficiency, making for a more economical heating solution.

Ultimately, the Stovax 1000, 1001, and 1002 wood-burning stoves are prized for their combination of stylish design, advanced technology, and practical features. They deliver not only warmth but also a captivating ambiance, making them an excellent addition to any home seeking tradition blended with modern style.
Top Page Image Contents