Enviro EC-061 installation instructions Freestanding Direct Vent Kit With Coupler, KIT Components

Page 1

Freestanding Direct

Vent Kit With Coupler

Please read and understand these instructions before installing. Failure to follow these instructions carefully could cause property damage or personal injury.

KIT COMPONENTS:

Quantity

Description

Quantity

Description

 

 

 

 

1

Horizontal direct vent termination cap

1

Ø65⁄8” (17 cm) 90° elbow

 

 

 

 

2

Flue collar adapters (only one used)

4

Wire spacers

 

 

 

 

4

T-20 Torx screws

3

Decorative rings

 

 

 

 

1

Wall thimble

1

4 oz tube RTV silicone

 

 

 

 

1

Inside finish trim collar

20

9/16” tech screws

1

5’ (190 cm) length of Ø4” (10 cm) double walled flex pipe

8

11⁄2” wood screws

 

 

 

 

2

24” (61 cm) section of Ø65⁄8” (17 cm) straight pipe

1

Vinyl siding deflector

 

 

 

 

Please ensure that all components are supplied with this kit. If components are missing or have been damaged, contact your dealer, distributor, or courier company. Do not attempt the installation if components are missing or damaged.

INSTALLATION INSTRUCTIONS:

1.Decide on a location for the unit that will meet any or all local code requirements. Refer to the sections in your owner’s manual on where to locating your stove, planning your installation and clearances to combustibles.

2.Set the appliance in the desired location. Determine if any wall studs, electrical wiring, or plumbing pipes are in the way of the venting system as it passes through the wall. If obstructions are found in the wall it may be required to adjust the location of the appliance.

3.Set the appliance in the desired location. Temporarily place a 24” (61 cm) section with the non-crimped end on the unit

4.Install the 90° elbow onto the vertical pipe on the stove pointing in the direction that the vent will exit the structure.

5.Project a level line from the center point of the elbow. Using this center point, scribe a 10” (25.4 cm) hole or square on the wall . Cut the hole out on both the interior and exterior wall surface.

6.Frame the hole as shown in Figure 1.

7.Install the wall thimble and secure the thimble to the inner wall surface.

8.With the appliance still in place install the 24” (61 cm) horizontal section on the elbow and let this section of pipe protrude through the exterior surface. Mark the pipe so that when it is cut it will be flush with the exterior wall.

9.Dismantle the outer pipe sections.

���

�������

���

�������

Figure 1

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Freestanding Direct Vent Kit With Coupler Installation InstructionsKIT Components Quantity DescriptionPage Part Number Option EC-061

EC-061 specifications

The Enviro EC-061 is an advanced environmental monitoring system designed to provide precise measurements and analysis for various ecological parameters. This innovative system is particularly noted for its versatility and application across several industries, including agriculture, water quality management, and air quality monitoring.

One of the main features of the Enviro EC-061 is its multi-sensor capability. The device integrates several sensors that measure temperature, humidity, soil moisture, pH levels, and other critical environmental variables. This enables users to acquire comprehensive data from a single device, thus streamlining the monitoring process. The system is equipped with high-precision sensors that ensure data accuracy, making it a reliable tool for researchers and environmentalists.

Another key characteristic of the Enviro EC-061 is its real-time data transmission functionality. Utilizing advanced wireless communication technologies, the device allows for instant data transfer to cloud-based platforms. This means users can monitor environmental conditions remotely and receive alerts about any significant changes that could warrant immediate attention. The cloud integration also facilitates data analysis, historical record-keeping, and enhanced collaboration among teams.

In terms of durability, the Enviro EC-061 is designed for harsh field conditions. It features a robust, water-resistant housing that can withstand various environmental factors, ensuring longevity and reliability. This makes it suitable for outdoor deployments, whether in agricultural fields, industrial sites, or natural reserves.

Moreover, the Enviro EC-061 comes equipped with a user-friendly interface, making it accessible for both experienced professionals and those new to environmental monitoring. The intuitive app interface allows users to customize settings, visualize data through graphs, and generate reports with ease. Additionally, the system supports integration with other smart devices, enhancing the overall monitoring experience.

In conclusion, the Enviro EC-061 is a cutting-edge environmental monitoring system characterized by its multi-sensor capabilities, real-time data transmission, durability, and user-friendly design. Its application across various sectors underscores its significance in promoting sustainable practices and proactive environmental management. By harnessing modern technologies, the Enviro EC-061 empowers users to make informed decisions based on reliable data, driving efforts to protect and enhance our ecosystems.
Top Page Image Contents