Zanussi

�The control unit provides several operating settings: time/core temperature according to NF and UK regulations, time/air temperature/probe personalised according to national regulations, sterilizing cycle: UV lamps built-in (on request), 3 single sensor or

3-sensor temperature probes (as accessory), ideal for meats, automatic defrosting and manual defrosting. All parameters are programmable.

�The control unit provides two large displays to read out: time, core temperature, residual time, alarms, service information.

�Two customizable cycles for each operating modes, allowing setting time and air temperature. These two programs (P1-P2) can be converted into ice-cream specialist cycles (shape maintenance and holding).

�All information related to the different operating models are recorded: date, time, cycle, core

temperature, holding temperature, HACCP accordance.

�An audible alarm starts when the cycle ends or terminates abnormally.

�Chilling times can vary according to food quantity, density, moisture contents and type of containers.

�Internal and external finishing in 304 AISI stainless steel and backpanel in galvanized steel.

�HCFC, CFC and HFC free insulation (Cyclopentane), HCFC and CFC free refrigerant gas (R404a).

�Developed and produced in ISO 9001 and ISO 14001 certified factory.

�Inner cell with rounded corners.

�Door equipped with removable magnetic gasket with hygienic design.

�Evaporator with antirust protection.

�Ventilator swinging panel foreasy access to the evaporator.

�Automatic heated door frame.

ACTIVE BLAST CHILLER / FREEZERS

100 KG-20 GN 1/1

�Hot gas defrosting system (on built-in models) or electric defrosting system (on remote models).

�Thermostatic expansion valve to optimize the cooling unit efficiency.

�Adjustable feet 150 mm high.

�Stand alone printer as accessory.

�PC connection as accessory, gate RS 485. No water connections required: Waste water can be plumbed into drain, but can also be collected in an optional waste container.

OPTIONAL ACCESSORIES
ACCESSORIES		MODELS
	BCF100A		BCF100RA
	110022		110024
1 SINGLE SENSOR PROBE CHILLER+C/FREEZER	880089		880089
2 SINGLE SENSOR PROBES CHILLER+C/FREEZER	880096		880096
3-SENSOR PROBE FOR CHILLER+C/FREEZER	880088		880088
60-MM PITCH ROLL-IN RACK FOR 20X1/1	922203		922203
60-MM PITCH ROLL-IN RACK FOR 20X1/1	922203		922203
80MM PITCH ROLL-IN RACK 14X1/1GN	922205		922205
AIR REMOTE UNIT CHILL+C/FREEZER CW 100KG			880031
AIR/WATER REMOTE UNIT F.BC+BCF LW 100KG			880059
BASE FOR 20X1/1 ROLL-IN RACK	922141		922141
KIT 3 SINGLE SENSOR PROBES FOR BC/BCF	880269		880269
KIT HACCP ADVANCED CONNECT. BC/BCF LW+CW	880183		880183
KIT HACCP EKIS	922166		922166	ZANUSSI
TROLLEY FOR 20X1/1 ROLL-IN RACK	922132		922132	ZANUSSI
PRINTER FOR HACCP BASIC VERSION	881532		881532
				P R O F E S S I O N A L
WATER REMOTE UNIT FOR C/FREEZER CW 100KG			880035	P R O F E S S I O N A L

www.zanussiprofessional.com

DCB04

2009-09-23

The Company reserves the right to alter technical specifications without prior notice.

OPTIONAL ACCESSORIES

MODELS

WATER REMOTE UNIT FOR C/FREEZER CW 100KG

880035

DCB04