Zanussi ZKC5540 user manual Replacing an oven light bulb

Page 31

Replacing an oven light bulb

•The type of bulb required is a 300°C 25 watt small Edison Screw.

WARNING!

Disconnect the appliance from the electricity supply before replacing the bulb.

•Make sure the appliance is cool before replacing the bulb.

•Open the door and remove the shelves.

•Remove the glass cover by turning it to the left.

•Unscrew the bulb by turning it to the left.

•Fit a new bulb and then replace the glass bulb cover.

•Replace the shelves.

•Restore the electricity supply and reset the time of day.

31

Image 31

Contents User Manual Cooker Contents During use Important safety instructionsInstallation Child safetyExtreme care must be taken when using a ceramic hob scraper Cleaning and maintenanceControls and their functions Product descriptionCookware Before using the applianceRating plate Condensation and steamGrill and oven furniture To set the time of day Electronic timerTo set the countdown Neon flashes To cancel the countdownCountdown indicator Press the selectorThat the correct time of day is displayed To set the timer to switch on and off automaticallyTo set the timer to switch off only Return to the time Day Cook time indicatorIndicator neon will Controls Continue to flash for a Cook timeRecommended saucepans Using the hobHints and tips when using the hob HobCooling fan for the controls may operate after a time Using the grillGrill Things to noteButton on Grill pan and handleSlide the handle Towards the right Hints and tips Grilling chartFood should be turned over during cooking as required Top oven Using the top ovenTo fit the top oven shelf Hints and tips Main oven Things to note Oven cooking chart Oven cooking chart 160 180 C Roasting chartDefrost Using defrostSlow cook Using main oven lightUsing slow cook Main oven lightGeneral points Food preparation slow cookingThaw thoroughly before cooking Care and cleaning To remove burnt on foodstuff Cleaning inside the grill and oven compartments To replace the door glass To remove the glassType of bulb required is a 300C 25 watt small Edison Screw Replacing an oven light bulbTimer does not work Oven is not cooking evenly TroubleshootingOven light fails to illuminate Oven fan is noisy Connecting to the electricity supply Installation instructionsEnsure all screws are securely tightened Ensure that the cover is securely fastenedEnvironment Technical dataEnergy save mode By switching off the time display you can save energyStandard guarantee conditions Guarantee / Customer carePage Page 349143401 04/2007