Zanussi ZGL 62 manual Wiring Diagram, Fault Finding, Preliminary Electrical Systems Check

Page 13

Wiring Diagram

A. TAPS IGNITOR SWITCHES

B. IGNITOR UNIT

Fault Finding

Preliminary Electrical Systems Check

Brown Blue

Blue

Brown Green Yellow

START

Isolate appliance and carry out:

A:Earth Continuity check.

PLUG (with cover removed)

SOCKET

 

(face view)

Earth Wire

(

)

 

 

Green/Yellow

E (

)

 

 

 

Neutral Wire

 

FUSE

 

 

Blue

 

 

 

 

 

 

 

 

 

N

 

L

NO

YES

Carry out:

Carry out:

 

Electricity supply

 

 

 

 

 

D: Resistance to

 

 

should now be

 

 

 

C: Polarity check.

 

 

 

 

 

Earth check.

 

satisfactory.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Has inlet fuse blown?

NO

YES

Inlet wiring faulty. Rectify any fault.

Isolate appliance and carry out:

B:Insulation check. Rectify any fault including replacing fuses as necessary.

A. EARTH CONTINUITY CHECK - Appliance must be electrically disconnected - meter set on Ω (Ohms) x 1 scale and adjust zero if necessary.

a)Test leads from any appliance earth point to earth pin on plug. Resistance should be less than 0.1 Ω (Ohm), check all earth wires for continuity and all contacts are clean and tight.

B. INSULATION CHECK - Appliance electrically disconnected, all switches ON.

a)meter set on Ω (Ohms) x 1 scale.

Test leads from L to N in appliance terminal block. If meter reads «0» then there is a short circuit.

b)meter set on Ω (Ohm) x 100 scale.

Repeat test with leads from L to E. If meter reads less than ∞ (infinity) there is a fault.

NOTE - Should it be found that the fuse has failed but no fault is indicated - a detailed continuity check (i.e. by disconnecting and checking each component) is required to trace the faulty component.

It is possible that a fault could occur as a result of local burning/arcing but no fault could be found under test. However a detailed visual inspection should reveal evidence of burning around the fault.

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents GAS HOB Important Safety Information Description of the Hob ContentsHob burners OperationBurner Minimum Maximum Diameter Hob Top Maintenance and CleaningPan Supports BurnersSomething Not Working? Service and Spare PartsZanussi Guarantee conditions Guarantee ConditionsThis guarantee does not cover Customer Care DepartmentEngineers technical data Instructions for the InstallerProvision for ventilation Important safety requirementsLocation Gas Connection InstallationCut Out Size Building over a cupboard or drawer BuildingBuilding over a kitchen unit with door Fitting the Hob into the worktopPermanent Connection Electrical connectionsFault Finding Wiring DiagramPreliminary Electrical Systems Check Ignition System / Gas Ignition Commissioning To adjust the gas rateConversion from Natural Gas to LPG Customer Care Zanussi
Related manuals
Manual 16 pages 17.69 Kb

ZGL 62 specifications

The Zanussi ZGL 62 is a versatile and efficient gas hob that exemplifies contemporary kitchen design and functionality. Renowned for its sleek aesthetics and robust performance, this appliance caters to the needs of both amateur cooks and seasoned chefs alike.

One of the standout features of the Zanussi ZGL 62 is its five gas burners, providing a range of cooking options to suit various culinary tasks. The burners come in different sizes, allowing for optimal heat distribution whether you are boiling, simmering, or frying. This flexibility enables users to prepare multiple dishes at once, making it an excellent choice for families or those who enjoy entertaining guests.

The hob is equipped with a powerful wok burner, designed to deliver high heat for quickly searing and stir-frying. This feature is particularly valuable for Asian cooking, where rapid heat is essential for maintaining the flavors and textures of ingredients. Additionally, the adjustable flame settings on all burners allow for precise control, ensuring that every meal is cooked to perfection.

Safety is a paramount concern in any kitchen, and the Zanussi ZGL 62 addresses this with built-in flame failure devices. This technology ensures that the gas supply is automatically cut off if the flame goes out, providing peace of mind during cooking. Moreover, the appliance features easy-to-use controls, with ergonomic knobs that provide a firm grip, enhancing user experience.

The hob is designed with a durable glass-ceramic surface that not only enhances its aesthetic appeal but also simplifies cleaning. This material is resistant to scratches and stains, making it easy to maintain its pristine look after cooking. The surface is also designed to withstand the rigors of everyday use, ensuring longevity.

Installation is straightforward, thanks to the appliance’s standard dimensions and compatibility with most kitchen setups. The Zanussi ZGL 62 is energy-efficient, contributing to lower energy bills while still delivering optimal cooking performance.

In summary, the Zanussi ZGL 62 offers a blend of style, safety, and efficiency. With its powerful burners, user-friendly features, and elegant design, it is a perfect addition to any modern kitchen, enabling cooks to unleash their creativity without compromising on safety or performance. Whether you are simmering a sauce or searing meat, this hob provides the versatility needed for a wide array of cooking styles.
Top Page Image Contents