Zanussi ZGL 62 manual Commissioning, Conversion from Natural Gas to LPG, To adjust the gas rate

Page 15

Commissioning

When the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below.

-Turn the gas tap to the MAX position and ignite.

-Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times. If the flame is unstable or is extinguished follow the procedure below.

)Procedure:

-Re-ignite the burner and set to MIN.

-Remove the control knob and use a thin bladed screwdriver to turn the adjustment screw until the flame is steady and does not extinguish, when the knob is turned from MIN to MAX.

-The adjustment screw may be located at the centre of the gas tap control shaft or on the gas tap body, left of the control shaft or below (see diagram).

-Repeat the adjustment procedure for all burners.

)Pressure Testing

-Remove left hand pan support and front left burner cap and crown.

-Fit manometer tube over the injector.

-Turn on the burner gas supply and ignite another burner.

-The pressure reading should be nominally 20mbar and must be between 17 mbar and 25mbar.

-Turn off the burner supplies.

Adjustment

screw

Conversion from Natural Gas to LPG

IMPORTANT

The replacement/conversion of the gas hob should only be undertaken by a competent person.

It is important to note that this model is designed for use with natural gas but can be converted for use with butane or propane gas providing the correct injectors are fitted and the gas rate is adjusted to suit.

Method

•Ensure that the gas taps are in the 'OFF' position

•Isolate the hob from the electrical supply

•Remove all pan supports, burner caps, rings, crowns and control knobs.

•With the aid of a 7mm box spanner the burner injectors can then be unscrewed and replaced by the appropriate LPG injectors.

To adjust the gas rate

With the aid of a thin bladed screwdriver completely tighten down the by pass adjustment screw, which is located down the centre of the gas tap control shaft. Upon completion stick the replacement rating plate on the under side of the hob.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents GAS HOB Important Safety Information Description of the Hob ContentsOperation Hob burnersBurner Minimum Maximum Diameter Burners Maintenance and CleaningHob Top Pan SupportsSomething Not Working? Service and Spare PartsCustomer Care Department Guarantee ConditionsZanussi Guarantee conditions This guarantee does not coverEngineers technical data Instructions for the InstallerImportant safety requirements Provision for ventilationLocation Installation Gas ConnectionCut Out Size Fitting the Hob into the worktop BuildingBuilding over a cupboard or drawer Building over a kitchen unit with doorPermanent Connection Electrical connectionsWiring Diagram Fault FindingPreliminary Electrical Systems Check Ignition System / Gas Ignition To adjust the gas rate CommissioningConversion from Natural Gas to LPG Customer Care Zanussi
Related manuals
Manual 16 pages 17.69 Kb

ZGL 62 specifications

The Zanussi ZGL 62 is a versatile and efficient gas hob that exemplifies contemporary kitchen design and functionality. Renowned for its sleek aesthetics and robust performance, this appliance caters to the needs of both amateur cooks and seasoned chefs alike.

One of the standout features of the Zanussi ZGL 62 is its five gas burners, providing a range of cooking options to suit various culinary tasks. The burners come in different sizes, allowing for optimal heat distribution whether you are boiling, simmering, or frying. This flexibility enables users to prepare multiple dishes at once, making it an excellent choice for families or those who enjoy entertaining guests.

The hob is equipped with a powerful wok burner, designed to deliver high heat for quickly searing and stir-frying. This feature is particularly valuable for Asian cooking, where rapid heat is essential for maintaining the flavors and textures of ingredients. Additionally, the adjustable flame settings on all burners allow for precise control, ensuring that every meal is cooked to perfection.

Safety is a paramount concern in any kitchen, and the Zanussi ZGL 62 addresses this with built-in flame failure devices. This technology ensures that the gas supply is automatically cut off if the flame goes out, providing peace of mind during cooking. Moreover, the appliance features easy-to-use controls, with ergonomic knobs that provide a firm grip, enhancing user experience.

The hob is designed with a durable glass-ceramic surface that not only enhances its aesthetic appeal but also simplifies cleaning. This material is resistant to scratches and stains, making it easy to maintain its pristine look after cooking. The surface is also designed to withstand the rigors of everyday use, ensuring longevity.

Installation is straightforward, thanks to the appliance’s standard dimensions and compatibility with most kitchen setups. The Zanussi ZGL 62 is energy-efficient, contributing to lower energy bills while still delivering optimal cooking performance.

In summary, the Zanussi ZGL 62 offers a blend of style, safety, and efficiency. With its powerful burners, user-friendly features, and elegant design, it is a perfect addition to any modern kitchen, enabling cooks to unleash their creativity without compromising on safety or performance. Whether you are simmering a sauce or searing meat, this hob provides the versatility needed for a wide array of cooking styles.
Top Page Image Contents