DO NOT clean the oven door while the glass panels are warm. If this precaution is not observed the glass panel may shatter. If the door glass panel becomes chipped or has deep scratches, the glass will be weakened and must be replaced to prevent the possibility of the panel shattering.
Contact your local Service Centre who will be pleased to advise further.
Hob
After every use wipe with a soft cloth well wrung out in warm water to which a little washing up liquid has been added, avoiding any leakage through the holes of the hob. Rinse and dry with a soft cloth.
To remove more stubborn stains, wet and leave to dissolve, do not scratch and avoid the use of abrasive or caustic products that could damage the enamel.
Burners
The burner caps and crowns can be removed for cleaning. Wash the burners caps and crowns using hot soapy water, and remove marks with a mild paste cleaner. A
After cleaning, be sure to wipe dry with a soft cloth.
Burner cap
Burner
ring
Burner body
OVEN BULB REPLACEMENT
Ensure that the appliance is switched off and disconnected from the electricity supply before replacing the bulb to avoid possibility of an electric shock.
If the oven bulb needs replacing, it must comply with the following specifications:
Wattage: | 25W |
Voltage: | 230/240V(50Hz) |
Temperatures: | 300ºC |
Thread Type: | E14 |
To replace the faulty bulb.
1.Turn the glass cover anticlockwise and remove.
2.Remove the faulty bulb and replace with a new one.
3.Refit the glass cover.
Reconnect the appliance to the electricity supply.
21