Zanussi ZGG642C manual Operation, Maintenance and Cleaning

Page 4

Operation

Hob burners

λΦpushToinlightthearelevantburner: control and turn it to maximum position;

λthen adjust the flame as required.

λIf the burner does not ignite, turn the control knob to zero, and try again.

If you use a saucepan which is smaller than the

recommended size, the flame will spread beyond the bottom of the vessel, causing the handle to overheat.

Take care when frying food in hot oil or fat, as the overheated splashes could easily ignite.

As soon as a liquid starts boiling, turn down the flame so that it will barely keep the liquid simmering.

If the control knobs become difficult to turn, please contact your local Zanussi Service Centre.

To ensure maximum burner efficiency, you should only use pots and pans with a flat bottom fitting the size of the burner used (see table).

Burner

minimum

maximum

 

diameter

diameter

 

 

 

Large (rapid)

180 mm.

260 mm.

Medium (semi-rapid)

120 mm.

220 mm.

Small (Auxiliary)

80 mm.

160 mm.

 

 

 

Maintenance and Cleaning

Before any maintenance or cleaning can be carried out, you must DISCONNECT the hob from the electricity supply.

The hob is best cleaned whilst it is still warm, as spillage can be removed more easily than if it is left to cool.

The Hob Top

Regularly wipe over the hob top and the aluminium frame using a soft cloth well wrung out in warm water to which a little washing up liquid has been added. Avoid the use of the following:

-household detergent and bleaches;

-impregnated pads unsuitable for non-stick saucepans;

-steel wool pads;

-bath/sink stain removers.

Should the hob top become heavily soiled, it is recommended that a cleaning product such as Hob Brite or Bar Keepers Friend is used.

The Burners

The burner caps and crowns can be removed for cleaning. The cap and crown of each burner are secured with two screws. To separate the two pieces, lift the crown, turn it upside down, then undo the two fixing screws as shown in fig. 1.

After cleaning, reassemble the two parts and refit the cap on its correct position on the burner.

Wash the burner caps and crowns using hot soapy water, and remove marks with a mild paste cleaner. A well moistened soap impregnated steel wool pad can be used with caution, if the marks are particularly difficult to remove.

After cleaning, be sure to wipe dry with a soft cloth.

Pan Supports

The pan supports are dishwasher proof.

If necessary, remove stubborn stains using a paste cleaner. Never use steel wool pads or acids.

Fig. 1

FO 2265

 

4

Image 4
Contents GAS Hobs Important Safety Information Contents Description of the HobMaintenance and Cleaning OperationSymptom Solution Service and Spare PartsSomething Not Working? Guarantee Conditions Customer Care DepartmentZanussi Service Force Midlands London & Eastanglia Instructions for the Installer Engineers technical dataImportant safety requirements InstallationFOWhen the HOB is First Installed LocationBuilding Cut Out SizeBuilding over a cupboard or drawer Building over a kitchen unit with doorSupply cable replacement Electrical connectionsPermanent Connection This HOB Must be EarthedWiring Diagram Fault FindingPreliminary Electrical Systems CheckIgnition System / Gas Ignition Commissioning To adjust the gas rateConversion from Natural Gas to Customer Care

ZGG642C specifications

The Zanussi ZGG642C is a high-performance gas hob designed to elevate your cooking experience. This versatile appliance features a four-burner layout, enabling you to prepare multiple dishes simultaneously. With burners of varying sizes, you can enjoy flexibility in cooking, whether you're simmering sauces on a low flame or boiling water quickly on a high-heat burner.

One of the standout features of the Zanussi ZGG642C is its efficient glass surface. Not only does it provide a sleek and modern aesthetic to your kitchen, but it also ensures that spills and food particles can be easily wiped away, keeping your cooking space tidy. The burners are designed for easy cleaning, enhancing the overall efficiency of the appliance.

The ZGG642C also incorporates advanced ignition technology. With a simple twist of the control knob, the gas ignites automatically, eliminating the need for matches or lighters. This feature not only enhances safety but also adds to the convenience of using the hob.

In terms of safety, the Zanussi ZGG642C has built-in flame failure safety devices, which automatically cut off the gas supply if the flame goes out for any reason. This technology is particularly important for peace of mind, especially in homes with children or pets.

Furthermore, the hob is equipped with ergonomic control knobs, positioned at the front for easy access. These knobs allow for precise temperature control, enabling you to adjust the flame effortlessly while you cook.

Durability is another key characteristic of the Zanussi ZGG642C. Built with high-quality materials, this hob is designed to withstand daily use and provide reliable performance over time. The robust construction ensures that it can handle the rigors of a busy kitchen.

This gas hob is also energy-efficient, making it a suitable choice for those looking to reduce their carbon footprint. By utilizing gas as a fuel source, the ZGG642C offers quicker cooking times while using less energy compared to electric alternatives.

In conclusion, the Zanussi ZGG642C is an attractive and functional addition to any kitchen. With its modern design, advanced safety features, and user-friendly controls, it promises a seamless cooking experience. Whether you’re a seasoned chef or a cooking novice, this gas hob is sure to meet your culinary needs with style and efficiency.