Zanussi ZGG642C manual Commissioning, Conversion from Natural Gas to, To adjust the gas rate

Page 15

Commissioning

When the hob has been fully installed it will be necessary to check the minimum flame setting. To do this, follow the procedure below.

-Turn the gas tap to the MAX position and ignite.

-Set the gas tap to the MIN flame position then turn the control knob from MIN to MAX several times. If the flame is unstable or is extinguished follow the procedure below.

Procedure:

 

Re-ignite the burner and set to MIN.

 

ΦRemove the control knob.

 

To adjust, use a thin bladed screwdriver and turn

 

the adjustment screw (see diagram) until the flame

 

is steady and does not extinguish, when the knob

 

is turned from MIN to MAX. Repeat this procedure

Minimum adjustment screw

for all burners.

Pressure Testing

 

ΦRemove left hand pan support and front left burner cap and crown.

Fit manometer tube over the injector.

Turn on the burner gas supply and ignite another burner.

The pressure reading should be nominally 20mbar and must be between 17 mbar and 25mbar. Turn off the burner supplies.

Conversion from Natural Gas to

LPG

It is important to note that this model is designed for use with natural gas but can be converted for use with butane or propane gas providing the correct injectors are fitted. The gas rate is adjusted to suit.

Method

•Ensure that the gas taps are in the 'OFF' position

•Isolate the hob from the electrical supply

•Remove all pan supports, burner caps, rings, crowns and control knobs.

•With the aid of a 7mm box spanner the burner injectors can then be unscrewed and replaced by the appropriate LPG injectors.

To adjust the gas rate

With the aid of a thin bladed screwdriver completely tighten down the by pass adjustment screw. Upon completion stick the replacement rating plate on the under side of the hob.

IMPORTANT

The replacement/conversion of the gas hob should only be undertaken by a competent person.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents GAS Hobs Important Safety Information Description of the Hob ContentsOperation Maintenance and CleaningService and Spare Parts Symptom SolutionSomething Not Working? Customer Care Department Guarantee ConditionsZanussi Service Force Midlands London & Eastanglia Engineers technical data Instructions for the InstallerLocation Important safety requirementsInstallationFO When the HOB is First InstalledBuilding over a kitchen unit with door BuildingCut Out Size Building over a cupboard or drawerThis HOB Must be Earthed Supply cable replacementElectrical connections Permanent ConnectionCheck Wiring DiagramFault Finding Preliminary Electrical SystemsIgnition System / Gas Ignition To adjust the gas rate CommissioningConversion from Natural Gas to Customer Care

ZGG642C specifications

The Zanussi ZGG642C is a high-performance gas hob designed to elevate your cooking experience. This versatile appliance features a four-burner layout, enabling you to prepare multiple dishes simultaneously. With burners of varying sizes, you can enjoy flexibility in cooking, whether you're simmering sauces on a low flame or boiling water quickly on a high-heat burner.

One of the standout features of the Zanussi ZGG642C is its efficient glass surface. Not only does it provide a sleek and modern aesthetic to your kitchen, but it also ensures that spills and food particles can be easily wiped away, keeping your cooking space tidy. The burners are designed for easy cleaning, enhancing the overall efficiency of the appliance.

The ZGG642C also incorporates advanced ignition technology. With a simple twist of the control knob, the gas ignites automatically, eliminating the need for matches or lighters. This feature not only enhances safety but also adds to the convenience of using the hob.

In terms of safety, the Zanussi ZGG642C has built-in flame failure safety devices, which automatically cut off the gas supply if the flame goes out for any reason. This technology is particularly important for peace of mind, especially in homes with children or pets.

Furthermore, the hob is equipped with ergonomic control knobs, positioned at the front for easy access. These knobs allow for precise temperature control, enabling you to adjust the flame effortlessly while you cook.

Durability is another key characteristic of the Zanussi ZGG642C. Built with high-quality materials, this hob is designed to withstand daily use and provide reliable performance over time. The robust construction ensures that it can handle the rigors of a busy kitchen.

This gas hob is also energy-efficient, making it a suitable choice for those looking to reduce their carbon footprint. By utilizing gas as a fuel source, the ZGG642C offers quicker cooking times while using less energy compared to electric alternatives.

In conclusion, the Zanussi ZGG642C is an attractive and functional addition to any kitchen. With its modern design, advanced safety features, and user-friendly controls, it promises a seamless cooking experience. Whether you’re a seasoned chef or a cooking novice, this gas hob is sure to meet your culinary needs with style and efficiency.
Top Page Image Contents