Zanussi ZBM 762, ZBC 741 manual When the Oven is First Installed, END of Cooking Timer MOD. ZBC

WHEN THE OVEN IS FIRST INSTALLED

Once the oven has been installed:

a)set the thermostat knob to MAX;

b)switch the oven function control knob to conventional cooking ( );

c)allow the oven to run empty for approximately 45 minutes;

d)open a window for ventilation.

During this time, an unpleasant odour may be emitted. This is absolutely normal, and is caused by residues of manufacturing.

Once this operation is carried out, let the oven cool down, then clean the oven cavity with a soft cloth soaked in warm soapy water.

Before cooking for the first time, carefully wash the shelf and the dripping pan.

To open the oven door, always catch the handle in its central part (Fig. 3).

FO 2161

Fig.3

END OF COOKING TIMER (MOD. ZBC 741)

SETTING THE TIME OF DAY

Push in completely the timer knob and at the same time turn it anti-clockwise, until the clock shows the correct time of day. Then pull the knob outwards to its original position.

MANUAL FUNCTION

Pull the timer knob outwards and at the same time turn it clockwise, until the symbol appears in the timer

window. This setting allows you to operate the oven manually, i. e. without any programme.

AUTOMATIC OPERATION

Pull the timer knob outwards and at the same time turn it clockwise, until the required cooking time is displayed in the timer window. This setting allows you to operate the oven manually, i. e. without any programme.

The diagram shows the timer set for 75 minutes of cooking.

When the required cooking time is up, the oven will switch off automatically, and an acoustic alarm will sound. To switch the alarm off, pull the timer knob outwards and at the same time turn it clockwise until

symbol is displayed in the timer window.

	11	12	1
10			2	WINDOW
9				3
8			4
	7	6	5
				KNOB
		11	12
10
9
			3		12
		4		11		1
6	5			10

54