Zanussi ZBC 748 installation manual If something goes wrong, Symptom Solution

If something goes wrong

If the appliance is not working correctly, please carry out the following checks, before contacting your local Zanussi Service Centre.

SYMPTOM	SOLUTION
■ The oven does not come on	◆ Check the oven is in manual operation and that
	both a cooking function and temperature have been
	selected.
	◆ Check the appliance is wired in properly, and the
	socket switch or the switch from the mains supply to
	the oven are ON.
■ The oven temperature light does not come on	◆ Select a temperature with the thermostat control
	knob
	◆ Select a function with the oven function control
	knob.
■ The oven light does not come on	◆ Select a function with the oven function control
	knob
	◆ Check the light bulb, and replace it if necessary
	(see "Cleaning the Oven")
■ It takes too much time to finish the dishes, or they	◆ The temperature may need adjusting
are cooked too fast.
	◆ Refer to the contents of this booklet, especially to
	the chapter “Using the Oven”.
■ Steam and condensation settle on the food and the	◆ Leave dishes inside the oven no longer than 15-20
oven cavity.	minutes after the cooking is completed. See page 8
■ The timer does not work	◆ Check the instructions for the timer.
■ The oven fan is noisy	◆ Check the grease filter is correctly fitted.
	◆ Check that shelves and bakeware are not vibrating
	in contact with the oven back panel.
If after all these checks, the oven still does not work,
contact your local Zanussi Service Force Centre
quoting your model and serial number, which can be
found on the rating plate.
Please note that it will be necessary to provide proof
of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.

22