Zanussi ZBC 748 Technical Data, Electrical Connection, Dimensions, Recess, Oven Cavity

Technical Data

DIMENSIONS	Height	580 mm.
OF RECESS	Width	560-570 mm.
	Depth	550 mm.
DIMENSIONS	Height	320 mm.
OF THE	Width	420 mm.
OVEN CAVITY	Depth	390 mm.
	Oven capacity 53.2 litres

Heating elements rating

Oven element	2.5 kW
Grill element	1.8 kW
Double Grill element	2.8 kW
Convenction Fan	30 W
Oven Light	15 W
Cooling Fan	25 W
Total Rating	2.870 kW

Electrical Connection

We strongly recommend that all operations for the installation of your cooker be carried out by QUALIFIED PERSONNEL to the relevant British Standards.

The oven is designed to be connected to 240V (50Hz) electricity supply.

The oven has an easily accessible terminal block which is marked as follows:

Letter L		-	Live terminal
Letter N		-	Neutral terminal
	-	Earth terminal

THIS APPLIANCE MUST BE EARTHED

The cable used to connect the oven to the electrical supply must comply to the specifications given below.

For Uk use only

Models	Rating	Cable cross	Fuse
		section mm2 and
		Type of the cable	min.
ZBC 748	2870 W	6 mm2
		6242 Y	15 A
For Europe use only
Models	Rating	Cable cross	Fuse
		section mm2 and
		Type of the cable	min.
ZBC 748	2870 W	2,5 mm2
		Ho5 RR-F	13 A

It is necessary that you install a double pole switch between the appliance and the electricity supply (mains), with a minimum gap of 3mm between the switch contacts and of a type suitable for the required load in compliance with the current rules.

The switch must not break the yellow and green earth cable at any point.

Important

After installation and connecting, the cable must be placed so that it cannot at any point reach a temperature of more than 50°C above the ambient temperature.

Before the appliance is connected, check that the main fuse and the domestic installation can support the load; and that the power supply is properly earthed.

The manufacturer disclaims any responsibility should these safety measures not be carried out.

24