Zanussi ZOU 330 manual Preparing Cabinet For Fitting Oven, Things To Note

Page 31
 Do not lift the appliance by the handles.

THINGS TO NOTE

￿This appliance is designed to be fitted between cabinets with the recommended dimensions as shown in Fig. 3 & 4.

￿If there is an existing housing unit it must be removed.

￿The dimensions given provide adequate air circulation around the unit within the cabinet, ensuring compliance with BS EN60-335.

￿This appliance must not be installed on a wooden base board.

￿Enquiries regarding the installation of the cooker point, if required, should be made to your Regional Electricity Company to ensure compliance with their regulations.

￿The cooker point should be within 2m of the appliance to make it accessible to switch off the appliance in case of an emergency.

￿To protect the hands, wear gloves when lifting the oven into its housing.

PREPARING CABINET FOR FITTING OVEN Do not lift the appliance by the handles.

NOTE: HOUSE CIRCUIT

Earth leakage / continuity tests must be carried out before the appliance is connected to the mains supply and re-checked after fitting.

PREPARING CABINET FOR FITTING OVEN

￿Make sure the space between the cabinets is the correct size for the appliance to be fitted (Ref. Fig. 5 & 6).

￿The plinth board spanning the space into which the appliance is to be installed should be removed.

￿If the size between adjacent cabinets is 605- 610mm, then the cabinets should be modified so that the recommended dimension of at least 600- 605mm is maintained.

￿The adjacent cabinets must be stable and firmly secured to the wall or floor. If necessary, make arrangements to ensure the work surface below which the oven will rest is level.

￿Drill two pilot screw holes into the sides of the adjacent cabinets, in the positions indicated by Fig. 5.

￿Fit the appliance mounting brackets using the two holes indicated in Fig.7 to the adjacent cabinets (Ref. Fig.5 & 6).

￿Check that the mounting brackets are level. They can be adjusted if necessary by using the extra holes at the ends of the brackets. Once the brackets are level, drill a pilot hole through the central hole in the bracket and fit the remaining screw.

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

31

Image 31
Contents INSTRUCTION BOOKLET BUILT-UNDER ELECTRIC DOUBLE OVEN AND GRILL ZOUCLEANING AND MAINTENANCE IMPORTANT SAFETY INFORMATIONINSTALLATION CHILD SAFETYElectronic Timer CONTENTSFOR THE INSTALLER Important Safety InformationBUILT-UNDER ELECTRIC DOUBLE OVEN DESCRIPTION OF THE APPLIANCETHE CONTROL PANEL GETTING TO KNOW YOUR APPLIANCE2 shelves for main oven cooking GRILL AND OVEN FURNITURE1 grill pan 1 grill pan handle 1 grill pan grid 1 shelf for grilling and top oven cookingHELPFUL HINTS WHEN BUYING AND PREPARING FOOD BEFORE USING THE APPLIANCEWHEN FIRST SWITCHING ON CONTROL PANEL INDICATOR NEONSA COOK TIME B END TIME C COUNTDOWN D TIME E DECREASE CONTROL ELECTRONIC TIMER2. HOW TO SET THE COUNTDOWN 1. SET THE TIME OF DAY3. SETTING THE OVEN TIMER CONTROL TO CANCEL THE COUNTDOWNA TO SET THE TIMER TO SWITCH ON AND OFF AUTOMATICALLY 6. THINGS TO NOTE B TO SET THE TIMER TO SWITCH OFF ONLY4. TO CANCEL AN AUTOMATIC PROGRAMME 5. TO RETURN THE APPLIANCE TO MANUALTHINGS TO NOTE USING THE DUAL GRILLThe grill door must be left open when grilling THE DUAL GRILLEnsure the handle is properly located Protect your hands when removing the grill pan handleTHE GRILL PAN AND HANDLE HINTS AND TIPSsuit GRILLING CHARTTHE TOP OVEN USING THE TOP OVENTO FIT THE TOP OVEN SHELF HINTS AND TIPS TOP OVEN COOKING CHART COOKING TEMPERATURES USING THE MAIN OVENTHE MAIN OVEN PREHEATINGTO FIT THE MAIN OVEN SHELVES MAIN OVEN COOKING CHART ROASTING CHART USING DEFROST FEATURE DEFROST FEATUREREMOVING AND REPLACING THE WIREWORK RUNNERS CARE AND CLEANINGCLEANING MATERIALS CLEANING THE OUTSIDE OF THE APPLIANCEAerosol cleaners must not be used on Stayclean surfaces CLEANING INSIDE THE OVENSImpregnated pads unsuitable for non- stick saucepans CLEANING THE OUTER AND INNER DOOR GLASS PANELSTO REMOVE THE OUTER DOOR GLASS Household detergents and bleachesREPLACING AN OVEN LIGHT BULB TO CLEAN THE INNER GLASS DOORCLEANING THE SHELVES, WIRE-WORK RUNNERS AND GRILL/OVEN FURNITURE TO REPLACE THE OUTER DOOR GLASSThe grill and top oven work but the main oven does not The grill, ovens and timer do not workThe timer does not work The indicator neons are not working correctly SOMETHING NOT WORKINGEmail service.eid@electrolux.ie SERVICE AND SPARE PARTSCUSTOMER CARE DEPARTMENT 0870European Guarantee GUARANTEE CONDITIONSStandard guarantee conditions Exclusions This guarantee does not coverCE Marking Directive 93/68/EEC TECHNICAL DETAILSThis appliance must be earthed INSTALLATION INSTRUCTIONSWARNINGS CHOICE OF ELECTRICAL CONNECTIONDo not lift the appliance by the handles NOTE HOUSE CIRCUIT PREPARING CABINET FOR FITTING OVENTO REMOVE COVER OF MAINS TERMINAL HOW TO FINISH UNPACKINGWarning This appliance must be earthed CONNECTING TO THE MAINS TERMINALCONNECTING TO A HOB OR COOKER POINT CHECKING ELECTRICAL CONNECTIONSFITTING INTO THE SPACE BETWEEN CABINETS N.B. Two people will be required to carry out the lifting procedureWarning Do not attempt to lift this appliance by the handles AT THE END OF THE APPLIANCES LIFE ZANUSSI 55 - 77 HIGH STREET SLOUGH BERKSHIRE SL1 1DZ TELEPHONE IMPORTANT NOTICEPart Number