Zanussi ZCE ID manual Introduction, Rating Plate, Installation

Page 8

INTRODUCTION

WARNING: THIS COOKER MUST BE EARTHED

RATING PLATE

Record the model, product and serial numbers on the back cover from the rating plate. This is situated on the lower front frame of the cooker and can be seen upon opening the fan oven door.

The cooker must be protected by a suitably rated fuse or circuit breaker. The rating of the cooker is given on the rating plate.

Do not remove the rating plate from the cooker as this may invalidate the guarantee.

INSTALLATION

If your cooker has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your cooker left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the cooker should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the cooker as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation. The cable must have conductors of sufficiently high cross-sectional area to prevent overheating and deterioration.

The recommended cross-section area is six square millimetres (6.00mm²).

The cable should be routed away from potentially hot areas marked by X in the diagram below.

REAR VIEW

To move the cooker, open the fan oven door, and lift the cooker by holding inside the top of the compartment.

This is a type Y cooker which means it is free-standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Ensure that the cooker is standing level.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 2mm all around the cooker is required to enable the cooker to be moved into position.

A spacer has been incorporated into the back of the appliance to ensure an air gap is maintained at hotplate level. Tiles or other forms of deep wall covering should not obscure this gap.

Air

8

Image 8
Contents Instructionzce Idbooklet Technical Details Model no ZCE IDContents Contents Preface Safety During OperationAfter USE GeneralRating Plate InstallationIntroduction General Notes on Using Your Cooker Control Panel Indicator NeonsAbout Condensation and Steam Cooling FAN for the ControlsGrill and Oven Furniture Control Panel FeaturesGetting to Know Your Cooker To USE the Countdown TimerTo SET the Time of DAY Setting the Controls for Automatic USE Automatic ControlRecommended Saucepans Using the HOBCeramic HOB Special Frying Note Deep FAT FryingPreserving Grill Uses of the Dual GrillSelecting the Grill Grill PAN and HandleGrilling Chart Hints and TipsTOP Oven Uses of the TOP OvenSelecting the TOP Oven To FIT the TOP Oven ShelfLHINTS and Tips Main FAN Oven Uses of the FAN OvenSelecting the FAN Oven Things to NoteLHINTS and Tips Oven Cooking Chart FAN Oven TOP Oven Food Shelf Cooking Approx Position Temp CRoasting Chart Roasting ChartUses of Defrost Feature DefrostingSelecting Defrost Hints and TipsCare and Cleaning To Reduce HOB Soilage Cleaning the Outside of the CookerCleaning Inside the Oven and Grill Compartments Care of Stayclean Surfaces Cleaning the Door GlassCleaning Between the Outer and Inner Door Glass To Remove the Outer GlassTo Replace the Outer Glass To Clean the Inner Glass Door PanelsReplacing the Oven Light Bulb Location of Splashback / Storage Board Something not WORKING? Cooker does not work at allService and Spare Parts Guarantee Conditions Standard guarantee conditionsPage ZCE ID Page Rating Plate Reference

ZCE ID specifications

The Zanussi ZCE ID is an innovative and reliable cooking appliance that combines style, efficiency, and advanced technology to meet the needs of modern kitchens. Designed with functionality in mind, this model is perfect for both novice home cooks and culinary enthusiasts alike.

One of the standout features of the Zanussi ZCE ID is its induction cooking technology. This method of cooking uses magnetic fields to generate heat directly in the pot or pan, ensuring that energy is used efficiently and evenly. As a result, cooking times are reduced while providing precise temperature control. This feature not only saves time but also minimizes energy consumption, making it an eco-friendly choice for environmentally conscious consumers.

In addition to its induction cooktop, the Zanussi ZCE ID boasts a spacious oven with multiple cooking functions, including conventional baking, grilling, and fan-assisted cooking. With a generous capacity, the oven accommodates large dishes, making it ideal for family meals or gatherings. The even heat distribution within the oven ensures that all baked goods come out perfect every time, eliminating hot spots that can lead to uneven cooking.

Ease of use is a priority with the Zanussi ZCE ID. Its intuitive digital controls and clear display make it simple to set cooking times and temperatures. The appliance also features a timer that ensures meals are cooked precisely, preventing overcooking and ensuring perfect results. Furthermore, the oven's self-cleaning function takes the hassle out of maintenance, utilizing high temperatures to burn away food residue, leaving the interior almost spotless.

Safety is enhanced with features such as residual heat indicators and automatic shut-off. These technologies provide peace of mind, especially in households with young children. The induction cooktop only heats the area under the pan, reducing the risk of burns and ensuring a safer cooking environment.

The sleek and modern design of the Zanussi ZCE ID complements various kitchen styles, while its durable materials ensure long-lasting performance. With a focus on combining aesthetics with functionality, this appliance is a valuable addition to any cooking space.

In summary, the Zanussi ZCE ID is a powerhouse of modern cooking technology, offering efficient induction cooking, a versatile oven, easy-to-use controls, enhanced safety features, and a stylish design. It represents a perfect blend of innovation and practicality, making cooking an enjoyable experience for everyone. Whether you are experimenting with new recipes or preparing family favorites, the Zanussi ZCE ID is equipped to handle it all.