The Singing Machine STVG-700 manual CD or CD+G Operation, Turning Power ON/OFF, Function Select

Page 9

CD OR CD+G OPERATION

PREPARATION

This unit is designed to play CD's bearing the identification logo. If CD's do not conform to the CD standard, they may not play properly.

Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion from the center to the outside of the disc.

Never use chemicals, such as record cleaning sprays, anti-static sprays or fluids, benzene or thinner to clean compact disc. These chemicals will permanently damage the plastic surface of the disc.

Always place the compact disc on the disc tray with the label facing upward. Compact discs can be played on only one side.

To remove a disc from its storage case, press down the center of the case and lift the disc out, holding it carefully by the edges.

Disc should be returned to their cases after use, protect them from dust and scratches.

To prevent warping the disc, do not expose it to direct sunlight, high humidity or high temperatures for extended periods of time.

Do not apply paper or write anything on either side of the disc. The inks used in some felt-tips pens, may damage the surfaces of the disc.

PLAYING CD OR CD+G DISC

Reminders:

Do not press the disc tray of the CD compartment while it's moving.

Never place anything except a compact disc on the disc tray. Foreign objects can damage the unit.

Do not apply excessive force to disc cover. Always place one disc to the disc tray at a time.

TURNING POWER ON/OFF

To turn on the Karaoke system, press the POWER switch button. The red LED POWER indicator will light up. To turn off the system, press POWER switch button again, the POWER indicator will turn off.

FUNCTION SELECT

Set the FUNCTION-SELECT switch to CDG position, and set the selection (TV /OFF/RADIO) switch to TV (or OFF) position. Don't set to the RADIO position.

LOADING A DISC

Press the OPEN/CLOSE button to open CD/CDG compartment tray. Close CD/CDG

compartment tray by pressing this key again.

PLAY/PAUSE Mode

To start playing, press PLAY/PAUSE button, the first track [ 1] and the PLAY/PAUSE LED Indicator will be displayed. (If a CD+G disc is detected, the CDG Red LED indicator will also on).

To temporarily stop playing, press the PLAY/PAUSE button, the PLAY/PAUSE LED indicator will flash.

STOP Mode

If STOP button is pressed in the course of playing, the disc will cease to play. (The total track number will be shown on the LED window).

SKIP PLAY (For both CD and CDG discs)

During STOP mode, you can skip up or down to your desired track number by

pressing a SKIP button ( -SKIP- ).

8

Image 9
Contents STVG-700 Class 1 Laser Important Safety Instructions N u s e CDG Control Locations IntroductionModel no Making the Connections Connecting PowerCD or CD+G Operation Turning Power ON/OFFFunction Select Loading a DiscSearch For CD disc only TV OperationsRepeat Play Program PlayPlayback Cassette OperationAM/FM Radio TV Broadcasting ReceptionSing Along Tape MICROPHONES/ECHO/TONECassette Deck. Unplug the microphone Recording Sing Along TV BroadcastingCare and Maintenance Problem Possible Cause Solution Trouble Shooting GuideSpecifications Page Page Page Singing Machine Company, Inc