Something not Working, Symptom Solution

SOMETHING NOT WORKING

If the appliance is not working correctly, please carry out the following checks before contacting your local Zanussi Service Force Centre

Symptom	Solution

No power to the appliance	Check there is power at the socket.

	Check there is not a power cut by checking the
	household lights.

	Check the fuse has not blown.

The light does not come on	Ensure that the bulb is correctly fitted.

	Replace the bulb if it has blown.

	Check the door light switch is not jammed.

The temperature in the fridge	Check the temperature in the fridge is turned to the
	correct setting relative to ambient conditions.

	Check the ambient temperature is within the
	applianceÕs operating limits of 10¡C to 32¡C.
	Relocate the appliance if necessary.

The compressor runs continously	Adjust the thermostat to give correct temperature
	control. See ÒSetting the temperatureÓ.

	Check that the door is closed.

	Large quantities of food have recently been placed in
	the cabinet/and or door is frequently opened.

	Check that air ventilation is not obstructed.

Noise	Refer to normal operating sounds.

Water under the salad bin	Check the drain hole is not blocked. (see
	Maintenance and Cleaning).

If after the above checks your appliance still does not operate correctly, contact your local Zanussi Service Force Centre.

Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the above checks have been made, as the engineer will make a charge if the fault is not a mechanical or electrical breakdown.